Ernie Ball CRNR Mike Dirnt
Results 1 to 4 of 4

Thread: Volume Pedal Wiring Help needed

  1. #1
    Join Date
    Feb 2018
    Posts
    2

    Volume Pedal Wiring Help needed

    Hi... I've just rewired my VP Jr to be used in a buffered place on my board. I've also bypassed the circuit board and have wired directly to the input and output jacks. The problem is that the curve of the pot is mostly in the first bit of travel rather than the last bit... Which wires do I switch?
    thank you for any help!

  2. #2
    Join Date
    Aug 2004
    Location
    Toronto, Canada
    Posts
    10,252
    Try reversing input and output and see if that helps. Also, this is the 25k version? With a 250k pedal after a buffer, the taper will be affected.

  3. #3
    Join Date
    Feb 2018
    Posts
    2
    Quote Originally Posted by beej View Post
    Try reversing input and output and see if that helps. Also, this is the 25k version? With a 250k pedal after a buffer, the taper will be affected.
    It is the 25K version. I have done as you suggested and it reversed the taper.... that is what I had hoped for, so thank you very much!

  4. #4
    Join Date
    Aug 2004
    Location
    Toronto, Canada
    Posts
    10,252
    Well there you go Just swap the input & output leads next time you open it up.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ernie Ball CRNR Keith Richards