Straps 2020
Results 1 to 7 of 7

Thread: Schaller M6 Locking tuners

  1. #1

    User Info Menu

    Schaller M6 Locking tuners

    Hello,

    Can anyone with enough experience specify which tuners from this list are on the EBMM JP guitars?

    Here's the link:
    M6 | Schaller

    The specs for the BFR says M6-IND:
    JohnPetrucciBFR6 | Guitars | Ernie Ball Music Man

    I want to upgrade my locking tuners on the Sterling JP100D with schallers and want to make sure I stick to the original design, but with better tuners. I don't know anywhere else to ask: should they be staggered or non staggered? I can figure out the screw holder angle by looking at the guitar.

    Thanks!
    Last edited by einarc; 09-06-2017 at 02:09 PM. Reason: Clarification.

  2. #2

    User Info Menu

    The M6 mini is the one. The IND stands for individual, because Schaller doesn't sell the 4 left, 2 right as a package.
    2003 Luke Luke Blue signed twice by Lucious
    2007 Luke LE Blue Dawn signed by Lucious

  3. #3

    User Info Menu

    Make sure the nut on the Schallers will be long enough to fit the thickness of the SBMM headstock as those models have slightly different specs than the USA versions - You might be able to use a thinner washer on the headstock face if things are close.
    Have you got G.A.S. for another EBMM???
    Visit the all new
    https://DUBALDOMUSIC.com! <--- My Store --->DuBaldo Music on Facebook & on twitter
    Do you want to TRADE your used EBMM in for a NEW one? -- Email me for details!
    pete@dubaldomusic.com <--- My email
    www.YELLOW9.com <--- My band

  4. #4

    User Info Menu

    Good to know about the SBMM headstock vs EBMM as I am looking switch tuners on my JP’s. Furthermore, could I just unscrew the pearloid tuning knob off a 2001 Black JP6; and unscrew the Schaller steel tuning knob off a Cinnabar BFR Majesty; could I get a pearloid accent on my Majesty Schaller’s without removing/installing the IND-6, by swapping the tuning knob only?

    If the knobs of these two models can’t be swapped w out machine removal, how risky do you suppose swapping out the whole machine from the Cinnabar’s headstock would be for a luthier?

    Pearl tuners would look good w the runway ebony (chrome knobs too) I think
    Thank you for the innovations BP

  5. #5

    User Info Menu

    Hello Grandma.

    Yes, you can change the tuner buttons (knobs) using a small flathead screwdriver. It’s very easy. Good luck.

    Here is a reputable website selling them:

    Schaller Replacement Knobs | stewmac.com

    Make sure to get the smaller ones.

    2019 Albert Lee - BFR - Electric Shimmer
    2019 Axis SS semi hollow - DuBaldo Blue - rosewood neck
    2019 StingRay fretless - BFR - Sierra Vintage Burst
    2018 Axis SS - BFR - Buckeye Burl
    2017 StingRay 5 - 30th Ann
    2013 Luke III - PDN - emerald green sparkle
    - rosewood neck
    2012 Morse - BFR - Dark Lord
    2010 Axis SS - red flame - rosewood neck
    2009 Axis - pink quilt
    2006 StingRay fretless - 30th Ann
    2000 Axis SS - Lavender Pearl
    1996 StingRay - 20th Ann
    1995 Albert Lee - Jim Messina’s

  6. #6

    User Info Menu

    hi guys...

    newbie here...

    hope everyone is doing alright...

    I'm planning on the same thing for my Sterling JP157....

    Has anyone here already upgraded their sterling JPs with a schaller locking tuners?

    and I did check out schaller locking tuners on their website as well...
    but not sure which one to get that will fit perfectly on it...

    Got a bit worried cause there's 2 options...
    the locking 19.5 and the locking 21.0..
    Last edited by Aizad_Emir; 05-20-2020 at 06:40 AM.

  7. #7

    User Info Menu

    Thanks Tollie!

    It was as easy as you said, just got to mind the self enclosed gear (did I say that right?). Going for this aesthetic...

    Would love love love to get some chrome pots.

    Truly, do y’all think cream or white pickups are the way to go for this aesthetic? And (I hope I do not get smote..) barring purchasing new pickups for a cosmetic, any argument for/against ebay/Etsy pup decal/sticker? I mean, 2$ vs illuminated msrp :/
    Attached Thumbnails Attached Thumbnails Schaller M6 Locking tuners-83ebcbd1-d93b-4e4d-bf90-bc1bbfd165cc-jpg   Schaller M6 Locking tuners-a8f5dad7-3940-4541-af38-cd942be15b0f-jpeg  
    Thank you for the innovations BP

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ernie Ball Forums