Mega Primo Mammoth
Results 1 to 7 of 7

Thread: PieZo not working

  1. #1

    User Info Menu

    PieZo not working

    PieZo not working-dc8b9f5c-7290-4441-ba53-5e4bf0d59464-jpgPieZo not working-be89c083-2997-4f1d-821b-795ed560b11e-jpgPieZo not working-bf454b02-ef48-4ace-baa5-b5d45677128d-jpgPieZo not working-0aad154e-647d-4afa-b401-27165023c0aa-jpgPieZo not working-9bd849e8-7596-4492-b88e-c99a2178521d-jpg

    Is the grey wire thatís half assed spliced and twisted together the reasons.
    All other cavities and wiring is fine and all ruled out except volume pot ,wire, or little unsoldered wire by my finger


    Thx!

  2. #2

    User Info Menu

    The “unsoldered wire” looks like the ground wire (if it’s an uninsulated wire, that’s what it is) that should be trapped under the control cavity cover when it’s in place to ground that cover. You can see a little depression in the body between the cavity and that screw hole where that wire has been previously.
    ---------------
    Hunter Hayes Cutlass in Lake Tahoe Blue
    Valentine BFR in Three-tone Burst
    Luke 3 HH in Starry Night
    Valentine in Trans Maroon
    Reflex Game Changer HSH with Piezo

  3. #3

    User Info Menu

    Quote Originally Posted by jones4tone View Post
    The ďunsoldered wireĒ looks like the ground wire (if itís an uninsulated wire, thatís what it is) that should be trapped under the control cavity cover when itís in place to ground that cover. You can see a little depression in the body between the cavity and that screw hole where that wire has been previously.

    THX for replying
    So what do I do?

    Do I order a part, bring it to a shop or send to EBMM?Ē

    Or can I fix?

    ThNks

  4. #4

    User Info Menu

    Did the piezo work previously? Is this a new guitar that you purchased, or did you buy it used?

    Your best option would be to contact customer service to see what they advise. It looks like the guitar may have had modifications done to the electronics, or at least someone messing around in there that didn't exactly know what they were doing.
    2007 Stingray 5 HS Cherry Burst / Maple FB / 3 Band EQ / Ceramic Pickups
    2012 Stingray 5 H Pearl Blue / Rosewood FB / 3 Band EQ/ AlNiCo Pickup
    2012 Steve Morse Morse Blueburst / Rosewood FB
    2012 Luke III SSH Vintage Sunburst / Rosewood Neck

  5. #5

    User Info Menu

    Yes, it was
    It’s mine, registered
    I contracted CS, and a drunk tech apparently is the one who installed a pickup(fired from the shop now)
    He knocked something loose
    It’s something there

  6. #6

    User Info Menu

    Best bet is to let the CS guys advise you. Keep in mind they're prepping for the NAMM show, so they may be a bit slow to respond.

  7. #7

    User Info Menu

    Thx beej

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ernie Ball Forums