Ernie Ball Prodigy Picks
Page 1 of 2 12 LastLast
Results 1 to 15 of 30

Thread: Buzzing on brand new EBMM St. Vincent?

  1. #1
    Join Date
    Feb 2018
    Posts
    14

    Buzzing on brand new EBMM St. Vincent?

    Just got my white St. Vincent today, love how it looks & feels, however there's some pretty aggressive buzzing across the board, particularly on the low e. It's been pretty cold this week while the guitar was on its way, so could the cold have just messed some stuff up/could it just need a bit of set up work? The action doesn't look TOO low, but what do I know.


    It was still in the plastic inside the case, so I'm the first person
    to touch it since it left the factory.

    Thanks!

  2. #2
    Join Date
    Jan 2007
    Location
    Central Ohio
    Posts
    2,315
    Let it acclimate to your climate for a few days.

    I know you say across the board - is buzzing up and down the neck as well? Or worse in certain areas?

    It may just need a truss road adjustment - but I'd try to ignore for a few days.
    EBMM Axis Super Sport (Pacific Blue Burst)
    EBMM L3 HH (Olive Gold)
    EBMM L3 HSS Roasted (Bodhi Blue)
    EBMM Silo Special (Blue Dawn)
    EBMM Albert Lee SSS (Sky Blue)
    EBMM Majesty (Iced Crimson)
    EBMM Cutlass (Vintage Turquoise)
    EBMM JP6 (Mystic Dream Fully Loaded)
    EBMM L3 BFR (Blueberry Burst)
    EBMM Cutlass HSS (Firemist Silver)

    www.TheseGuysLive.com
    Facebook

  3. #3
    Join Date
    Aug 2012
    Posts
    899
    Definitely let it settle in for a few days. It also may need a truss rod adjustment after that if the action is just too low. What kind of moisture level do you maintain in your guitar area?
    2007 Stingray 5 HS Cherry Burst / Maple fretboard / 3 Band EQ / Ceramic Pickups
    2012 Stingray 5 H Pearl Blue / Rosewood Fretboard/ 3 Band EQ/ AlNiCo Pickup
    2012 Steve Morse Signature Morse Blueburst / Rosewood FB
    2012 Luke III SSH Vintage Sunburst / Rosewood Neck

  4. #4
    Join Date
    May 2014
    Location
    D.C.
    Posts
    324
    The necks can be sensitive to humidity, so if you are where cold means the heat runs a lot and dries the air, then you might want to check that too. Usually in the plastic means from the factory untouched, so after acclimating should be good methinks. Can tweak the truss, if necessary, and that’s about all that’s usually required.
    I believe every guitar player inherently has something unique about their playing. They just have to identify what makes them different and develop it. EVH

    '14 GC HSHP
    '14 ASS Semi HHP - Black Cherry Burst
    '14 ASS Semi MM90 - Honey Burst
    '16 Axis - Trans Gold Quilt

    Mesa Boogie Mark V 25
    Suhr Corso
    Black Star HT-1
    Bad Cat 2x12

  5. #5
    Join Date
    Jan 2009
    Location
    Utah
    Posts
    749
    Likely just a simple truss rod adjustment will do the trick.

  6. #6
    Join Date
    Feb 2018
    Posts
    14
    Thanks for the replies y'all.

    I'm up in the northeast, so cold means COLD and dry, and the guitar travelled across the country to get here; very very slight fret ends in a couple spots from that journey, but not enough for me to care. Letting it acclimate, and hoping that'll do it, however the low E really is INSANE. Total beehive, from open E to the highest fret. My guitar area is just my room in a small apartment with air vents, so there's not a ton I can do for that besides keeping them in cases. The neck does look like it may be a bit too straight (as in, completely straight, no relief), so a slight adjustment should fix that, but the severity of the low E vs other strings is still concerning to me.

    Wait and see I guess. Aside from this issue, the guitar is PHENOMENAL, and this neck is unlike anything I've ever felt.
    Last edited by loser; 02-09-2018 at 12:53 AM.

  7. #7
    Join Date
    Oct 2009
    Location
    Illinois
    Posts
    1,280
    Congrats and welcome to the family! We have a rule around here - no pics, no guitar!!! Let's see 'em!!! Also, don't be a stranger, LOTS of great people in this part of the interwebs.
    EBMM 25th Anniversary G47729 DOB 8/5/2009
    SBMM SUB AX4 Duncan JB/Jazz pups SD pots StoneTone Rock Block trem block upgrade
    EBMM - a guitar like no other.
    Even we mancave noodlers can appreciate the perfection that is an EBMM guitar.
    "one likes to believe in the freedom of music..."

  8. #8
    Join Date
    Feb 2018
    Posts
    14
    Capoing the 1st and fretting the 16th, I can't fit a .73 pick under the 8th; the string is just about touching the fret. I assume some relief is in the neck's future, in this case? Having sat for a day it's gotten slightly better, but still pretty intense.


    As for pics

    Buzzing on brand new EBMM St. Vincent?-img_3664-jpg


    Here's the best I got right now. It's a really gorgeous white, love the slight contrast with the pg.

  9. #9
    Join Date
    Jan 2007
    Location
    Central Ohio
    Posts
    2,315
    You could try turning (loosen) the truss a bit and giving some time to settle and see if that helps. I usually loosen about the distance from one of the holes to the other (maybe 1/4 inch) at a time and allow it sometime to settle.

    Great looking guitar!!!!
    EBMM Axis Super Sport (Pacific Blue Burst)
    EBMM L3 HH (Olive Gold)
    EBMM L3 HSS Roasted (Bodhi Blue)
    EBMM Silo Special (Blue Dawn)
    EBMM Albert Lee SSS (Sky Blue)
    EBMM Majesty (Iced Crimson)
    EBMM Cutlass (Vintage Turquoise)
    EBMM JP6 (Mystic Dream Fully Loaded)
    EBMM L3 BFR (Blueberry Burst)
    EBMM Cutlass HSS (Firemist Silver)

    www.TheseGuysLive.com
    Facebook

  10. #10
    Join Date
    Feb 2018
    Posts
    14
    Also, since I've already got a thread going... with these unfinished rosewood necks, what should my post-play care routine be? On a nitro finish or w/e I'd normally wipe it down with a dry cleaning cloth after use, but should I do anything different here to avoid working dirt into the grain? How often should I use the wipes they imclude with it, if I decide to buy more?


    Thanks dudes

  11. #11
    Join Date
    Feb 2018
    Posts
    14
    ALRIGHTY, so during some late night playing I decided to try a slight truss rod adjustment; loosened it about the distance from one hole to the next. Raised the action on the higher frets but did seemingly nothing for my low E, so I put it back to where it was. This may be a job for someone more competent than myself lol.

    Here's a couple more photos for ya's


    Buzzing on brand new EBMM St. Vincent?-img_3668-jpgBuzzing on brand new EBMM St. Vincent?-img_3669-jpg

  12. #12
    Join Date
    Aug 2012
    Posts
    899
    Have you measured the action on the strings? Seems odd that only the E would be causing lots of buzz. Maybe it's a bad string.
    2007 Stingray 5 HS Cherry Burst / Maple fretboard / 3 Band EQ / Ceramic Pickups
    2012 Stingray 5 H Pearl Blue / Rosewood Fretboard/ 3 Band EQ/ AlNiCo Pickup
    2012 Steve Morse Signature Morse Blueburst / Rosewood FB
    2012 Luke III SSH Vintage Sunburst / Rosewood Neck

  13. #13
    Join Date
    Aug 2004
    Location
    Toronto, Canada
    Posts
    10,221
    Here's a quick primer on how to adjust the truss rod:

    Truss Rod Adjustment - YouTube

  14. #14
    Join Date
    Jul 2004
    Location
    Central Connecticut (Manchester) USA
    Posts
    9,260
    Quote Originally Posted by loser View Post
    Thanks for the replies y'all.

    I'm up in the northeast, so cold means COLD and dry, and the guitar travelled across the country to get here; very very slight fret ends in a couple spots from that journey, but not enough for me to care. Letting it acclimate, and hoping that'll do it, however the low E really is INSANE. Total beehive, from open E to the highest fret. My guitar area is just my room in a small apartment with air vents, so there's not a ton I can do for that besides keeping them in cases. The neck does look like it may be a bit too straight (as in, completely straight, no relief), so a slight adjustment should fix that, but the severity of the low E vs other strings is still concerning to me.

    Wait and see I guess. Aside from this issue, the guitar is PHENOMENAL, and this neck is unlike anything I've ever felt.
    If you are anywhere near Manchester CT then I'd be happy to take a look at the guitar with you.
    Have you got G.A.S. for another EBMM???
    Visit the all new
    https://www.DUBALDOMUSIC.com! <--- My Store --->DuBaldo Music on Facebook & on twitter
    Do you want to TRADE your used EBMM in for a NEW one? -- Email me for details!
    pete@dubaldomusic.com <--- My email
    www.YELLOW9.com <--- My band

  15. #15
    Join Date
    Jan 2018
    Posts
    7
    Mine has the exact same problem. Haven't been able to fix it. I could raise the low E to 1/8", but that's no good for playing. I've tried everything I know and still have the buzz. Let me know if you get it fixed.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ernie Ball Tremolo Pedal