Ultra Burly
Results 1 to 11 of 11

Thread: Scratch on Majesty

  1. #1

    User Info Menu

    Scratch on Majesty

    My son dropped the wire cutters on his guitar while he was restringing it. Is there anyway to fix this?

    Would a local guitar shop be able to smooth this out?
    Attached Thumbnails Attached Thumbnails Scratch on Majesty-img_3554-jpg  

  2. #2

    User Info Menu

    My condolences. You could drop fill it with a toothpick if you find a paint or nail polish tha matches close. That’ll make it less noticeable.

  3. #3

    User Info Menu

    It’s a guitar not a Van Gogh. That should be the first of many.
    Greg

    2010 HH AL
    2001 MM90 AL

    Dr. Z Stingray
    Orange RV50
    Dr. Z DB4

  4. #4

    User Info Menu

    My condolences, too. I would recommend the same thing as jlbasscatcher suggested. You can however, try to consult a guitar repairs man. Maybe that will yield better results. I unterstand you being upset about that scratch. Eventhough, an instrument is not a van Gogh I completely disagree with Norrin Radd considering this scar as the first of many.
    Somehow people are saying this alot but I don't understand how they handle their instruments. I have intensivly played guitars with only fret wear and decoloring of the fret board and the bridge. Most of my guitars are without a sincle scratch although I took them on stage or to rehearsal quite often. Some of the guitars I own for more than 10 years.
    Of course some have tiny dongs or scratches and it always hurts me when I see those damages but they are exceptions and a common or obligat thing.
    So I totally understand your frustration as I assume that the damage in your case is an exception, too. However, that is a very nice guitar with a nice color! Enjoy it.

    Regards, J

  5. #5

    User Info Menu

    Thanks, all. My son is upset about this...he bought this himself and worked really hard for the money. I've told him that we'd take it to someone to look at it. Luckily we have two independent guitar shops in town. He plays on a stage every week at an open mike at a bar, so he will be embarrassed, but I've told him that you'd almost have to be looking for the scratch to see it from more than 10 feet away.

  6. #6

    User Info Menu

    The first scratch hurts the worst. I always kick myself ... then forget about it.

    I've filled one or two with nail polish (when they get really bad). I've also used a sharpie, and crayon.

  7. #7

    User Info Menu

    Nothing to be embarrassed about. I can understand him being upset, but I'm quite sure nobody in the audience when he plays would notice or care about the scratch. The first ding on a new instrument is always painful, but it's like the first ding on a new car. If you drive (or play) long enough, it's going to happen.

    1998 Sterling 4H honeyburst lined fretless
    2006 30th Anniversary Stingray
    2014 Bongo 4HSp neptune blue w/roasted maple neck
    2014 Big Al 4SSS inca silver w/full rosewood neck

  8. #8

    User Info Menu

    On a matte finish leave it alone. On a gloss finish yeah you could try to nail varnish or super glue a spot full and sand back and polish in sucessively finer grits to high gloss and if done right it could be almost invisible. But not on matte. Leave it alone.
    Silhouette Special (2005 Buttercream Limited Edition)
    Cutlass HSS (2018 Roasted Special, Ivory White)

    Forum Rules and Useful MM Guitar Info

    Required reading - Forum Decorum

    Ernie Ball Customer Service
    Music Man Customer Service


    An Irishman in Paris, guitar teacher and tech, folder of underpants, stubber of toes.

  9. #9

    User Info Menu

    Ouch. It sucks, but it happens. The best thing to do, as I've learned the hard way once or twice, is to accept it and move on. In the grand scheme, it's not a huge ding, and even if you can cover it up somehow there's no way to make it perfect again. I'm in the camp of protecting and babying my guitars as much as possible, but occasionally life happens.
    My stuff:
    2007 Axis Pacific Blue Burst (9/25/07)
    2016 Axis SS Starry Night PDN (11/23/16)
    2016 Axis SS Semi-Hollow Trans Teal one-off (6/8/16)
    2018 Axis BFR Steel Blue No. 45 (9/18/18)
    2010 JP6 Mystic Dream (6/22/10)
    1989 Fender HM Strat HSS Blackstone
    2016 Gibson Les Paul Studio Deluxe Caribbean Night
    1995 Washburn N2 Padauk Stain
    2017 Taylor 224ce-K DLX Koa
    SBMM JP70 Trans Purpleburst
    SBMM S.U.B. SB4 Black

    http://mountainkingmusic.com
    http://spychocyco.blogspot.com

  10. #10

    User Info Menu

    I agree. Nothing you can do to fix this on a matte guitar. And most shops will not know what to do. What works for glossy guitars won't work here.

    Also, no human being in any audience is going to see that scratch. Hurts us owners, but the audience will never know.



  11. #11

    User Info Menu

    Many guitar shops don't take finish work for little things like that. Those that do often are rip offs.

    I would say get a tiny bit of matte finish polyurethane for touching up hardwood floors. Just a TINY bit.

    If he's looking to get the same color and everything... it's just not going to happen, I'm afraid to say. It looks like it is just in the clear coat though. Maybe just a tiny bit of thin superglue will make it less noticeable.
    2007 Stingray 5 HS Cherry Burst / Maple FB / 3 Band EQ / Ceramic Pickups
    2012 Stingray 5 H Pearl Blue / Rosewood FB / 3 Band EQ/ AlNiCo Pickup
    2012 Steve Morse Morse Blueburst / Rosewood FB
    2012 Luke III SSH Vintage Sunburst / Rosewood Neck

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ernie Ball Forums