Ernie Ball Cables
Results 1 to 4 of 4

Thread: Heads up on mounting a Fishman Triple Play

  1. #1
    Join Date
    Apr 2018
    Posts
    14

    Heads up on mounting a Fishman Triple Play

    Sadly, while it seems to be a great midi-synth device, it just doesn't fit under the strings of the Majesty Monarchy using the supplied mounting bases. Even the thinnest base is still too high. I'd have to raise the string height WAY too much, and that just isn't an option as I love the action just the way it is. And forget using the tremolo bar, as pulling up lowers the string height even more.

    Update:
    In a moment of inspiration I suddenly thought about a box of "Glue Dots" I bought a while back. It's that sticky rubber-like adhesive you've probably have seen in your mail (where they attach credit cards or whatever). It's not permanent and never hardens. It's safe for attaching posters to walls, fridge, whatever. Supposed to be chemically inert to painted surfaces.

    Without a mounting base under the pickup it's almost too low, but using the Glue Dots sets it at almost the perfect distance from the strings. The trade off is it's not readily removable as it would be with the mounting base, and the connecting wire doesn't unplug so you have to leave it all in place to charge the unit. No biggie. It still all fits in my guitar case just fine.
    Last edited by St8kout; 05-17-2018 at 07:12 PM.

  2. #2
    Join Date
    Jan 2018
    Posts
    93
    dremel
    Just because you're paranoid doesn't mean they're not after you.

  3. #3
    Join Date
    Apr 2018
    Posts
    14
    Quote Originally Posted by vuduhwy View Post
    dremel
    Or a file/sandpaper, but sanding down the mounting base would be pretty tough to do across the whole length, not to mention it's already pretty thin, but just not thin enough.

    When you slide the pickup into the mounting base, it actually has a gap, and that's the problem. It it was flat against the base it would probably work. Using Glue Dots instead of the mounting base seems to be the solution, at least in my case.

  4. #4
    Join Date
    Jan 2018
    Posts
    93
    Quote Originally Posted by St8kout View Post
    Or a file/sandpaper, but sanding down the mounting base would be pretty tough to do across the whole length, not to mention it's already pretty thin, but just not thin enough.

    When you slide the pickup into the mounting base, it actually has a gap, and that's the problem. It it was flat against the base it would probably work. Using Glue Dots instead of the mounting base seems to be the solution, at least in my case.
    I was actually joking. I probably should have put a disclaimer in my post.
    Just because you're paranoid doesn't mean they're not after you.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ernie Ball Tremolo Pedal