Majesty New Colors 2021
Results 1 to 5 of 5

Thread: Majesty claw screws, cant loosen

  1. #1

    User Info Menu

    Majesty claw screws, cant loosen

    So I watched this helpful video that shows you how to change the tuning of you guitar easily with a floating bridge

    This is Why You Suck at Guitar: How to change tuning and string gauges floyd rose tremolo - YouTube

    figured this sounds easy enough and something even I can do!

    So I blocked the tremolo, tuned guitar down 1/2 step, removed the block. Then when I went to loosen the claw screws to tune the guitar, they would not budge. Got to the point where it felt like the screw was starting to strip. Thought maybe the screwdriver size was a bit off, tried 4 different screw drivers.... no luck.

    Is it possible the screws are already as loose as they can go? Does that make sense for the guitar to come with the screws backed all the way off? There are 3 springs in the guitar btw cause Im sure someone will ask that. Please help, am I doomed to play in E standard indefinately?

    Its a 6 string Majesty btw.

    Thank You

  2. #2

    User Info Menu

    Had the same thing on my Valentine. They were in there pretty snug. Took some muscle but they finally broke free.

  3. #3

    User Info Menu

    Do you have any pictures of the claw screws you could post? Are there threads visible? How far is the end of the claw from the end of the trem cavity?
    2007 Stingray 5 HS Cherry Burst / Maple FB / Ceramic Pickups
    2012 Stingray 5 H Pearl Blue / Rosewood FB / AlNiCo Pickup
    2012 Steve Morse Morse Blueburst / Rosewood FB
    2012 Luke III SSH Vintage Sunburst / Rosewood Neck
    2021 Stingray RS Pacific Blue Sparkle / Maple FB

  4. #4

    User Info Menu

    Don't underestimate what a huge difference the type of screwdriver you are using can make.

    Is the tip of it worn? Have you test fit a #2 and a #3 to see which one grips the screw better? A slightly thicker handle will give you more torque to get them moving.

    If they are really stuck, then you will need the right size bit in a 1/4 holder with an extension and a ratchet for even more torque.
    2014 Majesty - Polar Noir
    2000 Axis - Trans Gold

  5. #5

    User Info Menu

    The most important thing is to use the right size philips bit. That way you won’t strip the screw head. Then put some muscle into it

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Ernie Ball Forums