Gifts for guitarists
Results 1 to 4 of 4

Thread: Rebuild a Sterling with EBMM parts

  1. #1

    User Info Menu

    Rebuild a Sterling with EBMM parts

    Anybody know what locking tuners would be drop in for a Sterling Sub Series Axis.
    Made in China. This is an awesome guitar for the $. Very impressed but,
    I'm going to refinish the neck with tru oil and gunstock wax.
    Clean up the frets and roll the edge of the fretboard.
    Replace the tuning machines
    Play around with the pickups and pots.
    Anybody done any of this i would appreciate any info you may be able to impart.
    Thanks. This is going to be fun.
    Last edited by oooogie; 03-11-2019 at 10:30 PM.

  2. #2

    User Info Menu

    I did this to a Silo3. It was fun and a good learning experience, but in my opinion was way to costly. I would have spent the same on a used Silhouette Special in the $1000 range. If you can get used pickups CHEAP, that is definitely worth it, but everything else I wish I'd have left as is based on value per cost.

  3. #3

    User Info Menu

    I have found that the headstocks on the SBMM instruments are typically a bit thicker than the EBMM versions and this does not always allow the tuners to function properly (due to variances in production they do sometimes fit). The washer & nut usually wind up partially blocking part of the hole in the tuning post, prohibiting the lower strings from going through the post smoothly.
    Have you got G.A.S. for another EBMM???
    Visit the all new
    https://DUBALDOMUSIC.com! <--- My Store --->DuBaldo Music on Facebook & on twitter
    Do you want to TRADE your used EBMM in for a NEW one? -- Email me for details!
    pete@dubaldomusic.com <--- My email
    www.YELLOW9.com <--- My band

  4. #4

    User Info Menu

    Hey Pete, it's Kim the guy looking to buy the tuners from you. I saw your picture in another post and I took a pic of my EBMM Axis SS. It looks like these are almost too short as well. But I measured the SBMM and it's a 1/16 thinner than my EBMM.
    Attached Thumbnails Attached Thumbnails Rebuild a Sterling with EBMM parts-img_3113-jpg  

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ernie Ball Forums