BFR Feb 2020
Results 1 to 6 of 6

Thread: Help / Advice with Luke III Push / Push Pot Replacement

  1. #1

    User Info Menu

    Help / Advice with Luke III Push / Push Pot Replacement

    The tone push/push pot on my 2013 LIII is not catching and I need to get a new pot.

    I read through some of the posts and see some people replacing with push/pull or other non EBMM part. I really do not care if push/push or pull. I just want to get it fixed and last.

    The EBMM part is about 15 bucks, so no big deal. I just am a little concerned that the guitar has almost no usage and the pot is flaky already and don't want to be repeating this on a regular basis if I can help it.

    So looking for advice if to try the EBMM pot again or just go with something else (and if so, what?).

    Also, not sure my soldering skills are up to snuff for this with the preamp, so any ballpark figures on what I should pay in labor to get the new pot soldered in (sorry if I am not suppose to ask $ questions, then just disregard this part)

    TIA

  2. #2

    User Info Menu

    before you do that, unscrew the knob and remove it. Sometimes the shaft slips a bit inside the knob, meaning when you push it down you can't get it go to down far enough to latch/unlatch.

    You also said the pot is flaky, does this mean it's scratchy, or does it have other issues?
    2007 Stingray 5 HS Cherry Burst / Maple FB / 3 Band EQ / Ceramic Pickups
    2012 Stingray 5 H Pearl Blue / Rosewood FB / 3 Band EQ/ AlNiCo Pickup
    2012 Steve Morse Morse Blueburst / Rosewood FB
    2012 Luke III SSH Vintage Sunburst / Rosewood Neck

  3. #3

    User Info Menu

    I also had this problem with my L3 when I got it. Opened it up and found that there's a plastic tab on the side of the body of the potentiometer. When I'd hold that tab in, the knob would lock in the down position, so I wrapped a zip tie around the pot. Doesn't look pretty but it works.

  4. #4

    User Info Menu

    Quote Originally Posted by tbonesullivan View Post
    before you do that, unscrew the knob and remove it. Sometimes the shaft slips a bit inside the knob, meaning when you push it down you can't get it go to down far enough to latch/unlatch.

    You also said the pot is flaky, does this mean it's scratchy, or does it have other issues?
    Yes, I tried adjusting the knob height but did not work. The pot works fine except for the not locking down. I tried spraying the pot with some cleaner. Worked for a few tries and now won't engage again.

  5. #5

    User Info Menu

    Quote Originally Posted by silence.speaks View Post
    I also had this problem with my L3 when I got it. Opened it up and found that there's a plastic tab on the side of the body of the potentiometer. When I'd hold that tab in, the knob would lock in the down position, so I wrapped a zip tie around the pot. Doesn't look pretty but it works.
    I saw that plastic tab when cleaning the pot. I don't care what it looks like if it works. Will try it tonight. THANKS!!!!

  6. #6

    User Info Menu

    I replaced that pot on a PDN red sparkle L3 once after knocking it/bending it when it was in the out position. I just called EBMM and got them to send me the part, took it to my guy and he replaced it, no issues after that... it wasn't my go to guitar or anything, but I used it for a good few years after that fix, no issues... actually traded it late last year for a PRS. :P

    Think my guy charged me 40 bucks CAD to install the thing (about 30 usd)... I'd rather pay the cash to someone who's good with this stuff than screw around with a soldering gun on a tiny motherboard. If all else fails, go this route... it will also help retain the guitars value, replacing broken bits with non factory parts kind of hurts these things in the resale/trade market. If you plan on keeping it forever, then obviously that's different.

    My original post about this: New Luke III tone knob issues
    ____________________
    Albert Lee HH
    Stingray BFR Dec '19
    Cutlass SSS
    Reflex Game Changer HSHP

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ernie Ball Forums