Joe Dart
Results 1 to 2 of 2

Thread: JP15 and Shure QLXD16 trouble

  1. #1

    User Info Menu

    Question JP15 and Shure GLXD16 trouble

    I got myself a new GLXD16 pedal wireless.

    It doesn't works well with my JP15 and MarK V.

    On the clean channel I can hear a kind of clipping espescialy when playing low notes. I tried to lower the unit gain at -10 db and it is still there.

    My question for you guys, if you use the GLXD16 , how much gain do you have to cut so that it works with that wireless ?

    Any tips to make it all fit ?

    Last edited by JP15; 07-06-2020 at 01:13 PM.

  2. #2

    User Info Menu

    It has something to do with the type of output jacks mm uses and the preamp for the piezo. Some wireless manufacturers recommend not using the trs type plug that the wireless often use and using a 1/4 inch barrel connector for the wireless and a standard 1/4 inch short patch cable to the guitar. I dont use the piezo on my jp6 so I dont leave a battery in the gtr either. My wireless works fine plugged directly in or the extension cable.
    Last edited by Fusionman; 07-07-2020 at 07:09 AM.
    2007 EBMM JP6 Mystic Dream w/piezo, matching headstock, dot inlays
    2002 EBMM Axis Sport Trans Gold, hum/hum, matching headstock, trem
    4 other non-MM gtrs

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Ernie Ball Forums