New Slinkys March 2020
Results 1 to 5 of 5

Thread: Is it possible to damage a musicman guitar by turning the truss rod too much?

  1. #1

    User Info Menu

    Is it possible to damage a musicman guitar by turning the truss rod too much?

    One of the features I like about the Ernie Ball guitars is the ease of which the truss rod can be adjusted.

    My question is if you do it much: either clockwise or anti, could the guitar be damaged in some way. And if so would there be any warning signs before permanent damage occurred?

    Any insight appreciated.

  2. #2

    User Info Menu

    if you loosen it too much, the nut may start to press against the body of the guitar. Other than that, loosening it can't really damage it.

    Tightening it too much could potentially damage the neck, snap the truss rod, etc. I never turn the truss rod more than 1/8 of a turn when tightening it.
    2007 Stingray 5 HS Cherry Burst / Maple FB / 3 Band EQ / Ceramic Pickups
    2012 Stingray 5 H Pearl Blue / Rosewood FB / 3 Band EQ/ AlNiCo Pickup
    2012 Steve Morse Morse Blueburst / Rosewood FB
    2012 Luke III SSH Vintage Sunburst / Rosewood Neck

  3. #3

    User Info Menu

    1) You really cannot break the neck itself with a truss rod. Maple is strong stuff all by itself.

    2) In terms of neck relief, there is no danger to the neck whether you have no relief or lots of relief.

    3) Truss rods can break but you need to really use a *lot* of force when tightening a truss rod to break it. If you cannot appropriately adjust your truss rod without wanting to use a long fulcrum to really crank it, you should stop and contact Music Man customer service. But as long as you can get it where you need it there is little to worry about.

    For more info, and piece of mind, see my blog post about truss rods...

    Truth About Truss Rods – Part 2 – Myth Busting! – DrKevGuitar.com
    Forum Moderator, Guitar Teacher and Guitar Tech, Folder of Underpants, Stubber of Toes.
    Irish/American in Paris

    Silhouette Special (2005 Buttercream Limited Edition)
    Cutlass HSS (2018 Roasted Special, Ivory White)

    Click here for my Music Man photo albums


    Ernie Ball Customer Service
    Music Man Customer Service


  4. #4

    User Info Menu

    You really shouldn't ever need to turn it more than 1 full turn either way... usually just 1/4 turn at the most.
    Balls are Best!!

  5. #5

    User Info Menu

    Thank you for the replies.

    From what people have said the truss rod appears to be 'idiot proof' unless I turn it to such an extent the real force is required.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ernie Ball Forums