Flat Ribbon
Results 1 to 9 of 9

Thread: String Gauge Versus The Schaller Locking Tuners

  1. #1

    User Info Menu

    String Gauge Versus The Schaller Locking Tuners

    It's NGD again, this time with the Turquoise/Full Rosewood Big Al HH. The strings were...not good, but that's okay, I have a box full of strings.

    I break out the Paradigms, 10-52, and start with the low E string. Out with the old! In with the new!

    Wait, the 52 doesn't want to go through the locking tuner post. Ah, it's user error. I can do this. It's just a string change. Work, work, work - nope. I resort to trying to push it through with needle-nose pliers. Nope. Good thing the hammer is in the garage.

    This is fine. I have some Slinkys, various kinds, and one set has a 48 versus that 52 in the Paradigm package. The 48 goes in just fine.

    Did you guys know this and not tell me?

    "Don't tell the bassist about the string post. Tell the others."

  2. #2

    User Info Menu

    I’ve had instances where it took some coaxing for the pin inside the tuner post to release and fully get out of the way. Required a couple of gentle raps on the tuner with the base of my hand, as I recall. That has been a rare thing in my experience, though.
    ---------------
    Axis SS Semi-Hollow in Diablo Blue
    Hunter Hayes Cutlass in Lake Tahoe Blue
    Cutlass RS in Charging Green
    Luke 3 HH in Starry Night
    Valentine in Trans Maroon
    Reflex Game Changer HSH with Piezo

  3. #3

    User Info Menu

    Yeah, definitely sounds like the locking mechanism isn't retracted far enough. There should be no issues using strings of that gauge.
    2007 Stingray 5 HS Cherry Burst / Maple FB / 3 Band EQ / Ceramic Pickups
    2012 Stingray 5 H Pearl Blue / Rosewood FB / 3 Band EQ/ AlNiCo Pickup
    2012 Steve Morse Morse Blueburst / Rosewood FB
    2012 Luke III SSH Vintage Sunburst / Rosewood Neck

  4. #4

    User Info Menu

    I guess I'll have to see where I can get one Schaller. Probably from Schaller, eh. And I'm not even a scientist.

  5. #5

    User Info Menu

    Hey Jack- try and see if you can get the string through one of the other tuners. If so, just swap them.

  6. #6

    User Info Menu

    Quote Originally Posted by beej View Post
    Hey Jack- try and see if you can get the string through one of the other tuners. If so, just swap them.
    yep that's I thought too must be an easy fix
    EVH Hardtail Red 1995
    Axis Sport SSS Trem Transparent Purple 1998
    Axis Sport MM90 Trem Transparent Orange 1999
    Axis SS Hardtail Piezo Honeyburst 2007
    Albert Lee MM90 Hardtail Dargie Delight 2007
    Bongo 4HH Stealth 2007
    BFR 25th Anniversary Venetian Red burst 2009

  7. #7

    User Info Menu

    Good thinking but the Slinkys are on there now. Next string change!

  8. #8

    User Info Menu

    I have had to use an awl sometimes to "unstick" the ball bearing. Stick in/pull out and string should go right in.
    2005 EBMM Axis Super Sport Rosewood Top/Rosewood Neck - Hardtail
    2006 EBMM Silhouette - Egyptian Smoke - HSH/Trem - Maple/RW neck
    2017 EBMM Silhouette - White - HSH/Trem - Maple/RW neck

    2019 SbMM Albert Lee - Trans Walnut - HSH Mod - ever changing
    2017 SbMM LK100D LUKE - Black Metallic - Stock - Dimarzio Transition pups
    2019 SbMM Axis - Black - Dimarzio Air Norton/AT-1 pickups
    2015 SbMM Silo3 SUB - Black/Maple HSS

  9. #9

    User Info Menu

    Hello

    I use 10-52 on my AL HH ... thus it should work for you.
    Sometimes, a little drop of WD40 can do a miracle. As TBoneSullivan said, it is certainly the locking mechanism that does not want to move (perhaps it is waiting for a vote recount ???????)

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Ernie Ball Forums