Sweeeet!! Coated Bass Strings!!!

**Grand Wazoo** · 08-24-2009, 10:49 AM

Has Stings & Things received supply for the UK market? I haven't checked with Pete lately... perhaps you know?

**TheStiffness** · 08-24-2009, 01:05 PM

Originally Posted by Grand Wazoo

Has Stings & Things received supply for the UK market? I haven't checked with Pete lately... perhaps you know?

They're on their way!

**Grand Wazoo** · 08-24-2009, 02:39 PM

Thank you kindly

**strummer** · 08-28-2009, 04:04 PM

I've had the coated strings (45-130) on Heinz for a couple days, and here are the impressions:
Apart from a slightly different sheen and a slight sense of unstickyness (they feel a little different to the touch, but it's only really noticeable when "fondling" the bass), they feel just like normal strings. They sound like normal strings too, which is a good thing.

Now if they just last they'll be a big hit I'm sure.

**bovinehost** · 08-28-2009, 06:47 PM

I've got a set on my red Bongo. I'm not a roundwound guy, but these are pretty nice.

**Grand Wazoo** · 08-29-2009, 12:27 AM

The bass coated strings have finally hit the UK!

http://cgi.ebay.co.uk/ERNIE-BALL-COA...4.c0.m14.l1262

There's only 3 more sets available from that seller!

I've just bought a set, now as soon as they arrive I'll let you know how they perform. Problem is now.... on which bass should I try them, the Stingray5 or the Bongo?

**spideyjg** · 08-29-2009, 10:50 PM

Local GC had sets of coated but only the standard Slinky not the Hybrid.

Grabbed a set and need to decide what they will go on. Very likely the Sabre.

Jim

**lowmid** · 09-01-2009, 12:25 PM

I can't get them to tune!!! they slip on my stingray's tuners!!!! I'm reallly pissed because I had to wait for them to ship from the USA......

is this normal???

**lowmid** · 09-01-2009, 12:42 PM

I wrapped Two turns around the tuners and they slip on the tuners, Impossible to tune up!!!

**Grand Wazoo** · 09-01-2009, 01:24 PM

Originally Posted by lowmid

I can't get them to tune!!! they slip on my stingray's tuners!!!! I'm reallly pissed because I had to wait for them to ship from the USA......

is this normal???

Originally Posted by lowmid

I wrapped Two turns around the tuners and they slip on the tuners, Impossible to tune up!!!

That is strange lowmid, this is the first time someone has come up with this issue, so far a lot of forumites had these strings and not experienced this problem,

I remember clearly that BP mentioned that he sent sets of these strings to endoreser artists for them to test and feedback before actually putting them on sale worldwide, the very fact that they are now on sale means the result of the artists test was thumbs up all around.

Can I ask you out of curiosity, if you have inserted the tip of the string inside the peg before winding it around the peg?

Sounds to me like you probably need to discuss this with Customer Service.

Good luck and please report back, I am interested to hear what caused this.

Cheers

**spideyjg** · 09-01-2009, 01:41 PM

Hmmmm I haven't tried mine yet but 2 to 3 turns, 4" past the post, is my typical setup. I have strung my #1 bass that way for 12+ years and even though not a MM I will slap these on that since there is no doubt at all the tuners of that can cope with 2-3 winds of a round.

I'll report any anomaly and contact CS if they slip. I really hope not. I have only 2 times ever had slippage and those were flats.

I wonder how Ed winds his?

Jim

**lowmid** · 09-01-2009, 02:57 PM

I always wind them this way: I put the tip of the strings fully inside the peg and then leave about 2-3 turns around the peg when they are at tension, never had any problems!