Results 1 to 3 of 3

Question about the 20th Silo Piezo System

This is a discussion on Question about the 20th Silo Piezo System within the Music Man Guitars forums, part of the Gear Talk category; Hey guys, I was just curious about something. I noticed that looking at the back of a 20th Silo w/piezo, ...

  1. #1
    Join Date
    Oct 2006
    Location
    Levittown, PA
    Posts
    1,931

    Question about the 20th Silo Piezo System

    Hey guys, I was just curious about something. I noticed that looking at the back of a 20th Silo w/piezo, that it doesn't have the piezo adjustment knobs on the back like my JP6 does. So is it possible to adjust the mix, bass, and treble like you can on the JP's? Are the pots inside the cavity? Thanks in advance.

    EDIT: Another question...the 20ths that have the Custom Made neck plate, are they the ones with the upgraded tops, or did all the 20ths come with that neck plate? I found a thread from a while back that Robelinda posted, but it seems like he never got an answer. Thanks again.

    -Phil
    Last edited by petruccirocks02; 12-02-2007 at 02:37 AM.

  2. #2
    PeteDuBaldo's Avatar
    PeteDuBaldo is offline Registered User Senior Member
    Join Date
    Jul 2004
    Location
    Central Connecticut (Manchester) USA
    Posts
    7,507
    Phil,

    The mix controls for the piezo are located in the electronics cavity - you can adjust them!

    All 20ths had the "Custom Made" neck plates, the only way to tell if it was ordered as a flame or quilt is to look at the original build tag, or provide EB the serial number and they can tell you.

    If you are looking at a hardtail piezo rosewood matching, the build code would be 551-80-21-00. A dealer specified quilt would be 551-SQ-21-00, and a specified flame would be 551-SF-21-00.
    550 - hardtail
    551- hardtail piezo
    560 - tremolo
    561 - tremolo piezo
    Have you got G.A.S. for another EBMM???
    then VISIT www.DUBALDOMUSIC.com! <--- My Store
    Do you want to TRADE your used EBMM in for a NEW one? -- Email me for details!

    pete@dubaldomusic.com <--- My email

    www.YELLOW9.com <--- My band

  3. #3
    Join Date
    Oct 2006
    Location
    Levittown, PA
    Posts
    1,931
    Quote Originally Posted by PeteDuBaldo View Post
    Phil,

    The mix controls for the piezo are located in the electronics cavity - you can adjust them!

    All 20ths had the "Custom Made" neck plates, the only way to tell if it was ordered as a flame or quilt is to look at the original build tag, or provide EB the serial number and they can tell you.

    If you are looking at a hardtail piezo rosewood matching, the build code would be 551-80-21-00. A dealer specified quilt would be 551-SQ-21-00, and a specified flame would be 551-SF-21-00.
    550 - hardtail
    551- hardtail piezo
    560 - tremolo
    561 - tremolo piezo
    Thanks Pete. By the way, I called a couple days ago, I'm not sure if you got the message or not. I'll try calling you again. If I don't get ahold of you, if you could give me a call that'd be great. I shot you an email also. Thanks.

    -Phil

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •