JP6 mesa triaxis setting + String adjustement

[snoopy5555]

HI

I have a JP6 since 2 years, i like it very much
but i am not able to use it with the pickup selector in the center.
The mid sound so weird, i am only using the neck and bridge pickup.

Anyone have a setting with triaxis to tried it?
or do you have the same problem?
Setting (String 10-46 in 440hz)


Few weeks ago, i sent my guitar to an ajustement.
(authorised Ernie ball dealer)
In my great surprise,
at the 12 fret, the top of the fret to bottom of the big string (6 string)
is 2.2mm for me it seems far.

The guys told me if it put it down, the string will buzz.

thanks
Stephane

[Lou]

The middle position on a JP to me is best when played through a clean sound or slightly overdriven.

As far as your guitar set up. You should have the shop adjust your setup intil you are happy with it. You are playing it.

[guitfiddle]

I concur. The shop needs to set it where you like it most. I think 1.6 mm is the factory standard (check the FAQ, I'm almost positive it's listed in there), but it needs to be what suits you the best.

[snoopy5555]

thanks Guys

I do not play a lot in clean mode or little overdrive.

Does anyone of you have or add a switch to put
the midlle section in serial instead of parallel.

Thanks