• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

PeterVV

Well-known member
Joined
Nov 1, 2016
Messages
85
Location
South Wales , UK
The trem arm is a bit long for my liking, has anyone modified this, is it possible to remove the tip and saw an inch off and push the tip back on the shortened arm?
 

Fro

Well-known member
Joined
Aug 17, 2012
Messages
782
I’m sure you could. I shortened a Strat trem years ago. The plastic tip was screwed on and it worked fine just pressed on the shortened arm. You can always order a new trem arm from Music Man.
 

Cenobyte

Well-known member
Joined
Feb 3, 2012
Messages
147
Location
Toronto, Ontario, Canada
I've thought about doing this myself, only thing that stands in the way is that the metal/plastic tip screws onto the end of the trem arm... you'd have to super glue it on to the arm or something after resizing it (or re-thread the arm), but as dude above mentioned above you can always order a replacement from EBMM. :)
 

GWDavis28

Well-known member
Joined
Jun 23, 2003
Messages
12,470
Location
Mass
Or get it rethreaded from a near by machine shop, most should be able to do it and it shouldn't cost that much.

Glenn |B)
 
Top Bottom