• Security notice: Ernie Ball staff will never send you a direct message about a prize or giveaway, and will never ask you to click a link to "claim" anything.
    If you receive a message like that - even from an account whose name looks official - do not click the link. Please report it using the Report link on the message so the moderators can act. A scam campaign impersonating admin accounts was blocked on 29 July 2026; those accounts are banned and their messages have been deleted.

hartke players

jubjub721

Well-known member
Joined
Jan 10, 2004
Messages
936
Location
wichita
hey you guys, as some of you know i am the proud owner of a ha7000 head. its a 350 by 350 bi amp. im looking to set up my rig with all hartke cabinets. which ones do you guys recomend.
 
jubjub721 said:
hey you guys, as some of you know i am the proud owner of a ha7000 head. its a 350 by 350 bi amp. im looking to set up my rig with all hartke cabinets. which ones do you guys recomend.

I'd recommend really old XL115 and XL410 cabs, one of each will give you the good old Hartke sound.

@Shamus63: Love your avatar; must be a EBMM Bimbo HH, no?
 
I also have a Hartke 7000 head. I'm using it with a Hartke 2200 cab (2x12). It's a 4 ohm cab that goes down to 29 hz. It's loud with plenty of bottom. If I need more volume I'll bi-amp it with a Trace Elliot 1x15.

I've been thinking about getting another Hartke 2200 cab or the 1800 (1x18) cab to really move some air. If I had a truck to haul it around in, I'd get the 2x15 cab. I love 2x15 cabs!
 
strummer said:
I'd recommend really old XL115 and XL410 cabs, one of each will give you the good old Hartke sound.

@Shamus63: Love your avatar; must be a EBMM Bimbo HH, no?
HH'r? :D

I've really got to stop changing av's, otherwise nobody can follow the meaning of these posts...nah, FI! :D
 
i forgot, if you dont biamp it, will it run at 700 watts?
im thinkin about gettin a xl115 and a xl 2.5 10
all of this stuff will be abught over a period of time though. prolly with the 2.5 10 first, just cause it is lighter than mine and i can carry it to small gigs and play at my church with it.

but first question is most important.
 
strummer said:
I'd recommend really old XL115

Hate to say it, but I worked for a music store in about '89/90. Used to trip over these things, there were so many of them in the repair shop... Not sure if it was a case of too much or too little power, but "the" rig in the day was a G-K 800RB with the 410 and 115.
 
jubjub721 said:
i forgot, if you dont biamp it, will it run at 700 watts?

You will be blessed with the full 700 watts with a 4 ohm load. If you DON'T bi-amp, that's two 8 ohm cabs. If you DO bi-amp, you can have two 8 ohm cabs on each side.

So if you bi-amp, that 7000 amp can drive two 2x15 (4 ohm) Hartke cabs!!!!! That makes me chomp at the bit!
 
Last edited:
yeah, that amp is one of the best i have used, but thats not sayin much. i tone is kill, thanks for answering the question
 
I've got a 810xl that sounds really nice... i like it better than when I biamped the 410 and 115 approach. Right now I'm on 210xl duty only though (people don't like loud bass in tight quarters).
 
high mileage said:
Hate to say it, but I worked for a music store in about '89/90. Used to trip over these things, there were so many of them in the repair shop... Not sure if it was a case of too much or too little power, but "the" rig in the day was a G-K 800RB with the 410 and 115.

Yeah, they were never the most reliable boxes, but then their power handling was low and people really abused them. Still, if the speaker is to be a Hartke, those old ones are the best both sound and reliability wise.
 
Here's my current rig set-up. I bought the Hartke XL Series 115 Bass Module yesterday for $200; sounds BIG and clear!

Now, I've just got to find a pre-amp for extra 'coloring'. Looking at Ampeg and Tech21 NYC.

BassRig1.jpg
 
Looks a little similar to my set up the Ashdown amb evo2, the 500wt 210 combo version, with a Hartke 410 transporter cab for good measure.....cracking, guitarist scaring sounds with the SR5 - god I love those Ashdowns.
 
jubjub721 said:
wow, great price.
Yeah, not a bad used price for the 1x15. You know what's even scarier...

...the $150 I paid just a few days before that for the Goliath Jr. III...:eek:

Oh yeah, and the Ashdown MAG-300R was $350 new w/Overnight shipping!

Good Times! :D
 
Ok, everybody close their eyes and imagine a...

Hartke HA5500 Head

on top of a

Hartkle XL 4x10 cabinet

on top of a

Hartke XL 4x10 cabinet


There - that's the picture I would have posted (with my Sterling, of course) if I had taken a picture of my rig! :D
 
i think in the end, ill put my money in 410 or a 210 and a 115. This is so i can just take the light 210 when i go and play at my church and stuff.

yeah itll be a while before i purchase these things, maybe after xmas.
 
Back
Top