• Security notice: Ernie Ball staff will never send you a direct message about a prize or giveaway, and will never ask you to click a link to "claim" anything.
    If you receive a message like that - even from an account whose name looks official - do not click the link. Please report it using the Report link on the message so the moderators can act. A scam campaign impersonating admin accounts was blocked on 29 July 2026; those accounts are banned and their messages have been deleted.

Jack Questions

T-Maniac

Member
Joined
Aug 15, 2006
Messages
17
I have a SUB4 I got a couple of weeks ago. It sounds awesome and plays great, but the jack is a bit flakey. When I first got the bass I opened it to check on a ground buzz issue (which in the end was my house wiring - i gotta leave well enough alone :rolleyes: :o ). Since I did that the jack has been a bit flakey.

Usually its 100%, but sometimes I'll need to juggle the cable a bit, and sometimes it'll start buzzing like a madman.

I've looked up threads about this and on the 3-bands you can pull out the jack and bend the contacts, but mine has an enclosed jack directly soldered to the PCB.

Are there any simple solutions? i.e. no soldering or jack swap?

If i do need to switch, is the jack a switchcraft? If so, can I get the model #?

Also, just out of curiosity, why is the switching arrangementand special 4-terminal jack used instead of just the usual stereo jack battery ground switch trick thing?

Ok too much text. Just looking for easiest way to fix it mainly.

Thanks,
TMANIAC
 
I would change out the cable first. Sometimes these things just give up the ghost and will buzz occasionally. If you did that and still have it, try calling Customer Service. :cool:
 
Definitely not the cable... and definitely my fault unfortunately!

Will call customer service... I would have done that earlier just I got it used so I figured I'd be on my own as far as they're concerned.

THanks for the replies.

TMANIAC
 
Back
Top