• There is a glitch in the forum software and/or configuration that we are still trying to track down. For now, please make sure that the title of your new thread does NOT start with a number (digits). Otherwise, your post will appear to be saved but future attempts to read it will be met with an error message indicating the thread/post cannot be found. ~ admin

Code Eleven

Member
Joined
Aug 27, 2016
Messages
6
Long time lurker, first time poster!

I just purchased my second JP7, a JPXI-7, and have been experiencing an odd issue with the piezo/mono input. When I plug in the cable, the first second or so is dead then the signal starts popping/cracking in for a second or so then is perfectly fine the remainder of the time. Anyone else had this issue and know what exactly is the cause?
 
Last edited:

Lou

Well-known member
Joined
Jan 23, 2003
Messages
1,357
Location
MA
What brand of cable? Some brands fit better than others. Have you tried different ones?
 

Code Eleven

Member
Joined
Aug 27, 2016
Messages
6
What brand of cable? Some brands fit better than others. Have you tried different ones?

Ive tried several, all work fine in the magnetic but the issue persists in the piezo/mono. Like I stated, once the signal comes in its fine, moving the cable around makes no noise or anything either. Definitely stumped.
 
Top Bottom