• Security notice: Ernie Ball staff will never send you a direct message about a prize or giveaway, and will never ask you to click a link to "claim" anything.
    If you receive a message like that - even from an account whose name looks official - do not click the link. Please report it using the Report link on the message so the moderators can act. A scam campaign impersonating admin accounts was blocked on 29 July 2026; those accounts are banned and their messages have been deleted.

Need technical advices

J-Nick

Well-known member
Joined
Feb 25, 2005
Messages
502
Location
Somerville MA, USA
Hello there

I'm sorry for the question, I'm sure it has already been covered but I want to make sure I don't screw up my guitar...

I'm getting serious fret buzz when I fret the low E string at the 13th fret (that's the only spot on the neck where I get the buzz). Can I correct the probelm by adjusting the truss rod? If so, in which direction?

Any thing else I should know?

Thanks for your help...
 
when you look down the neck, does there appear to be a bow in the neck? or does it look pretty straight?
 
brentrocks said:
when you look down the neck, does there appear to be a bow in the neck? or does it look pretty straight?

I will have to take a look tonight... what would I do in each case?

The weird thing about this buzz is that it appeared as I was playing all of a sudden I couldn't fret the 13th fret on the low E, and it was fine 5 minutes before...weird
 
J-Nick said:
Hello there

I'm sorry for the question, I'm sure it has already been covered but I want to make sure I don't screw up my guitar...

I'm getting serious fret buzz when I fret the low E string at the 13th fret (that's the only spot on the neck where I get the buzz). Can I correct the probelm by adjusting the truss rod? If so, in which direction?

Any thing else I should know?

Thanks for your help...

buzzing that far up the neck is fixed by raising the bridge a LITTLE.......
if tht makes the action too high over the rest of the neck ....tighten the truss rod wheel about a 1/4 to 1/2 a rotation.......
stir to taste.......
 
tommyindelaware said:
buzzing that far up the neck is fixed by raising the bridge a LITTLE.......
if tht makes the action too high over the rest of the neck ....tighten the truss rod wheel about a 1/4 to 1/2 a rotation.......
stir to taste.......

Tightening the truss rod would be turning clockwise or counterclockwise when looking from the bridge to the headstock?
 
Last edited:
one more question... I would raise the whole bridge as oppose to a single saddle? How do I raise the whole bridge (it's an axis sport, hardtail)?

Sorry for being so ignorant :o

Thanks for the help
 
J-Nick said:
one more question... I would raise the whole bridge as oppose to a single saddle? How do I raise the whole bridge (it's an axis sport, hardtail)?

Sorry for being so ignorant :o

Thanks for the help


sorry. 4 some reason i always visualize a morse unless otherwise indicated. :D
an axis hardtail u do only the saddle that needs raising......
 
J-Nick said:
I will have to take a look tonight... what would I do in each case?

The weird thing about this buzz is that it appeared as I was playing all of a sudden I couldn't fret the 13th fret on the low E, and it was fine 5 minutes before...weird

This sounds like it might just be time to put new strings on. You might want to try that first.
 
Back
Top