Pan Pedal Question

[Sigmunds Couch]

Any wiring schematics available for this? The application that I am looking to see if this performs is most aptly described at crossfading between piezo and mag in a single pedal in a live setting. The way the description reads on the 6165 leads me to think that it's not set up for that.

I run dual VP Jrs. to do this now but a heel -toe fade between mag and piezo would allow me to minimize the notorious pedalboard shuffle dance.

 

[thindave]

Siggy, I have one and used it just as you're looking to do - worked fine...

I used the EB stereo cable so that I was only running one cord form the guiatr.

 

[Sigmunds Couch]

Cool. Thanks

The nerd in me would still like to see a scat though.

 

[fsmith]

Doug,
John answered this a few years back on his forums. Here's his response:

There are two ways to do this. Either use both outputs. One to the amp and one to a DI into a board or acoustic amp. Or use one rts cable out of the stereo jack and use a splitter box to split the piezo and magnetic. Then set the mag/piezo selector on the guitar to the middle position. With a volume pedal on the electric rig, you can fade in and out your magnetics while playing the acoustic. Got it?
John

fred