• Security notice: Ernie Ball staff will never send you a direct message about a prize or giveaway, and will never ask you to click a link to "claim" anything.
    If you receive a message like that - even from an account whose name looks official - do not click the link. Please report it using the Report link on the message so the moderators can act. A scam campaign impersonating admin accounts was blocked on 29 July 2026; those accounts are banned and their messages have been deleted.

Steve morse modification?

route66north

Member
Joined
Jun 18, 2004
Messages
9
Hi,

Was wondering if anyone has the actual wiring diagrams of the Steve Morse guitar? I'm not talking about the pic showing the operation of the levers, switches, knobs.

I assume the bridge humbucker is 4 wire conductor with two wired together then a hot and the ground? What I'm looking to do is putting in a mini switch to coil tap the bridge for even more tonal features. I don't have one of these guitars yet so that's why I'm asking for anyone who ever looked inside their morse guitar.

Thanks
J.
 
Last edited:
Do you really think that is necessary? You already have two single coils in there!:D
 
Not necessary, but would be nice to use a single coil from the bridge with one of the middle single coils for a different humbucker tone. Also, I like going being able to cut a humbucker or vice versa during songs without changing the 'tone'. I know I could easily go to a single coil sound with that 3-way lever, but it will change the tone.

Who knows, I might actually never get around to it, but would like to know.
 
Is his HSH or SSS?

I'd say this setup would be more diverse with the coil taps compared to an Emg HSH / morse setup because you can't coil tap EMG humbuckers(you can, however, simulate them with EMG accessories).
 
Last edited:
The NORM model, unfortunately, never made it to production.

As owner would need an IQ of over 170 to operate one.

It is, however, perhaps the most sought after modified EB guitar on this board.

KEITH
 
Back
Top