• Security notice: Ernie Ball staff will never send you a direct message about a prize or giveaway, and will never ask you to click a link to "claim" anything.
    If you receive a message like that - even from an account whose name looks official - do not click the link. Please report it using the Report link on the message so the moderators can act. A scam campaign impersonating admin accounts was blocked on 29 July 2026; those accounts are banned and their messages have been deleted.

Still Got The Silhouette Special Blues... =(

Wolf Static

Member
Joined
Jan 28, 2005
Messages
21
Location
Orange County, CA
Hi guys,

I posted earlier about tuning problems I'm having with the Silhouette Special, but I couldn't find it - so I decided to post a new one. Anyway, the problem is that the 3rd string goes out of tune (sharp), after doing even moderate dives with the non-Floyd tremolo. If I then do a simple whole step bend on the 3rd string, it goes back into tune. Someone here kindly recommended using Big Bend's Nut Sauce to lube the nut which I did, but it sadly didn't fix the problem. One thing I forgot to mention though, was that I did have those string-saver teflon saddles installed on the guitar. Could that have anything to do with it? Could the string be getting stuck on the bridge-side of the guitar? I would really appreciate any help as my lovely guitar is currently stuck on the shelf collecting dust, when it could be out there getting played.

Thanks In Advance
 
More likely not the saddles, unless you notice more string breakage at that point, I would think. More than likely it's catching in the nut. You may need to have the nut grooved/filed again to make it smooth or end up replacing the nut if that doesn't work. Sometimes the nuts get "over grooved" from lots of use and end up digging into the nut itself. If the sauce didn't work I would likely take it to a pro.
 
Sounds like nut binding... Like Norrin Radd said, you'll probably need the nut re-slotted or replaced... What guage strings do you use? Moving up a guage can result in nut slots that are too small...
 
Back
Top