Scarbee

Active member
Joined
May 19, 2005
Messages
35
Location
Holbaek, Denmark
Hi

Can the Stingray Special 4H have a coil split? The HH version uses it - so I guess its possible? There seems to be 3 wires from pickup - are those ground, front coil and rear coil?

If not possible - will a MM Classic pickup fit the hole?
 

danny-79

Well-known member
Joined
Feb 6, 2009
Messages
2,427
Location
England U.K
The problem you will have splitting the pickup is hum as there is no dummy pup.
Your best bet would be looking at a series/parallel switch for an extra dimension. Personally I’ve never done it with stock EBMM parts but anything is possible
 
Last edited:

Scarbee

Active member
Joined
May 19, 2005
Messages
35
Location
Holbaek, Denmark
Hi
I received the Special today and it is possible to cool-split it. Noise is no problem if you isolate with copper.
The bass is great - but the pickup sounds a little dull compared to Classic one. I installed the classic pickup and put space between D/G string on the bridge. Now it sounds exactly like the classic - with much more brilliance.
 
Top Bottom