• There is a glitch in the forum software and/or configuration that we are still trying to track down. For now, please make sure that the title of your new thread does NOT start with a number (digits). Otherwise, your post will appear to be saved but future attempts to read it will be met with an error message indicating the thread/post cannot be found. ~ admin

Joined
Oct 21, 2021
Messages
7
Location
Boston, MA
Hi friends! New to the forum and a recent EBMM convert.

I have a Stingray RS and a Valentine and was thinking about another JValentine because the neck is TOO comfortable.

If I got a second, I’d swap the bridge for a humbucker and the neck for a p90 but does anyone know the string spacing I should order for these two swaps?

Thanks in advance!
 

racerx

Well-known member
Joined
Mar 10, 2021
Messages
80
I just pulled out the calipers on my Valentine --

2.01 in / 2 + 1/64 in / 51.29mm is the measurement I get in-between the outer strings @ center of outer pole pieces on the neck humbucker.

2.1 in / 2 + 7/64in / 53.43 mm is the measurement I get for the same on the bridge single-coil (didn't slant).

In either case I'd recommend choosing "F-Spaced" pickups for best fit if you don't replace with another set from EB.

As an aside, I feel like I'm the only guy on the planet (well, outside of James Valentine I guess) that likes the stock pickup configuration in the Valentine!
 

jones4tone

Well-known member
Joined
Jun 24, 2016
Messages
985
Location
Texas
As an aside, I feel like I'm the only guy on the planet (well, outside of James Valentine I guess) that likes the stock pickup configuration in the Valentine!

Nope, I wouldn’t dream of changing the pickups on my Valentine. I love it the way it is.
 
Top Bottom