Who makes the Push-Push pots like in the Valentine?

[Astrofreq]

Hey everyone,

I'm thinking of installing one of those latching Push/Push volume knobs in one of my guitars. Does anyone know who makes those?

Thanks.

-------------------------

EDIT: I just found that the EBMM shop sells them. Could this pot be used for a Coil split and as a volume knob?

500k Push/Push Potentiometer

500K push/push tone potentiometer for the following Ernie Ball Music Man guitars: Luke 3 (with push/push on tone), Valentine, JP13, JP15, JP16 and Majesty with version 1 preamps. Also used as push/push volume pot for the StingRay Short Scale bass. Note: Majesty v1 preamps have the mono/stereo...

shop.music-man.com

 

[GWDavis28]

Looks like a 500 ohm one.

Valentine

The Ernie Ball Music Man James Valentine “Valentine” guitar features a slab ash body, two Ernie Ball Music Man designed pickups (1-humbucker/1-single coil), with 3-way custom wired lever switch, coil tap, modern hardtail bridge with vintage bent steel saddles, 25.5-inch scale, oil and wax...

www.music-man.com

Shop Ernie Ball Music Man - Parts Shop for Music Man Guitars and Basses

shop.music-man.com

Not sure if those will work.

Glenn |B)

 

[beej]

Absolutely. I replaced the 500k tone pot on my HH Luke with one, for coil splitting. Very handy.

 

[Astrofreq]

Thanks! I’m going to give this a try.

 

[msquared]

I got a 25k set of these when I put Fishmans in one of my Valentines. It worked great and gave me essentially the same control interface.

At this point I just buy them from EBMM for my other guitars when doing similar work. They're quite nice.

 

[JoeTam]

Are these made by CTS? Also looking for one for a Caparison.