Wiring Luke EMG pickups kit

[kioeev]

Hello all,

Does anyone knows where can I get the wiring plans for a Luke pickup systems ( EMG SA57-SA57-85 )

I search on emginc.com... unsuccessfull...

thanks a lot

ciao
kioeev

 

[Colin]

have you contacted EMG? Wiring diagrams for all MM models are also available on the Ernie Ball website.

 

[kioeev]

Here's what I found on ernieball website:
http://www.ernieball.com/mmonline/techinfo/controls/cfd_luke.gif

And I need the schematics of the pickups wiring.

If I don't find anything simply, I'll contact EMG

Another Idea ?

thanks
kioeev

 

[beej]

Yeah, that's the switching diagram not the wiring diagram.

Email MM customer service - they should be able to send you a wiring diagram for the Luke.

 

[Lucidology]

It's under support on the EMG website ... they have PDF files, with very easy to follow diagrams you can just print out...

They have the David Gilmore, Vince Gill, Kirk Hammet and the Luke versions all right here ..

(copy & paste)

http://www.ernieball.com/forums/newreply.php?do=newreply&noquote=1&p=254729

 

[kioeev]

Hello,

Thanks for answers !

I'm sorry to play the geek, but on EMG website, support section, I only saw those wiring informations as pdf:

EMG-81, 85, 60, 60A, H, HA EMG-ZW Set EMG-89 EMG-91 EMG-707 EMG-DG20 EMG-S, SA, SV, SAV, Combination Systems EMG-T (Set), FT, RT, TC (Set), FTC, RTC EMG-P, P5, P6, J Set, LJ, HB, 35P, 35P4, 40P5, 45P, 35J, 40J, 45J, 40P, 35CS, 35DC, 40CS, 40DC, 45CS, 45DC EMG-H1(A), H2(A), H3(A), H4(A) EMG-S1, S2, S3 EMG-35HZ, 40HZ, 45HZ EMG-AT93U, AT125U EMG-B EMG-LJV, JV Set EMG-AB EMG-SPC, RPC, EXG EMG-ACS with Battery Bag EMG-ACS (Battery Bag Only) EMG-BTC Control, BTS Control, BTC System, BTS System EMG-BQC Control, BQS Control, BQC System, BQS System 4SW, 5SW, 6SW EMG-B30EQ, B64EQ 4 & 6 Channel Mixer HEQ-A, HEQ-E AV EXB VMC PA2 Pi2

And no Luke information...

Thanks a lot

kioeev

 

[joecool]

ths

thhhhhhhhhhhhaaaaaaaaaaaaaaahaaaaaaaaaaaaaaaas

 

[TonyEVH5150]

Email these good folks at EBMM customer service. They'll get you the info you need.

http://www.ernieball.com/contact/

The Luke set is available pre-assembled on a standard strat pickguard. seems like you could just take it straight off of that and install it on a new one with a minimum of fuss.

 

[MrMusashi]

for the hardwired kit:
http://www.emginc.com/content/wiringdiagrams/EMG-Strat.pdf

for the quickconnect kit:
http://www.emginc.com/content/wiringdiagrams/SSH_Combo_0230-0156A.pdf

they are shown with 85 pickup but the 81 got the same wiring.

hth!

MrM

 

[kimonostereo]

If you need the one to wire up your Luke correctly with the little circuit board inside, you need to contact Customer Service. They sent me a diagram for the wiring.