I've done some searches but couldn't produce anything that was similar to my problem. I have also checked all of my measurements to make sure they are to Ernie Ball standards such as the measure for relief in the neck, the distance between fret and strings, and the distance between the plastic of the pickup and G string (which is slightly lower than the 4.76mm recommended). This setup was done after putting on brand new DR Hibeams .45-1.05 gauge. What could be done to fix this problem? I've heard that some MM just have "dead" or quiet d and g strings. Is this the case or can I fix it? Thanks guys.
Deryc
Deryc