Datta
Well-known member
I am adding a second pickup to my EBMM Sterling. This is being done at a reputable guitar shop by a very capable professional, who like me is scratching his head over this.
So far I have NOT been able to get my hands on a preamp schematic. The schematic I got from MM (which is also widely available on the Inet) does not show how the coils’ signal paths are routed through the preamp. Both coils (not including the phantom coil -which is not an issue) of the existing pickup have seperate connections to the preamp. In other words, apart from the selector switch, four seperate wires go into the preamp at different places.
I'm sure one of you smart guys out there has already figured this out, or you know someone who has.
Any clues?
Appreciate any help,
Datta Groover
So far I have NOT been able to get my hands on a preamp schematic. The schematic I got from MM (which is also widely available on the Inet) does not show how the coils’ signal paths are routed through the preamp. Both coils (not including the phantom coil -which is not an issue) of the existing pickup have seperate connections to the preamp. In other words, apart from the selector switch, four seperate wires go into the preamp at different places.
I'm sure one of you smart guys out there has already figured this out, or you know someone who has.
Any clues?
Appreciate any help,
Datta Groover