Help! About Majesty 7

[a985412334]

HI,
I have a Majesty 7. Does any one know what is the function of this screw hole? I am curious about it. Because I just use hex key to turn it, and a small screw fell out from this small screw hole. I am worried about this would influences the sound. I hope someone can help me. Thank you very much.

 

[johnnyboogie]

I don't know the exact function of that screw, but why not give a quick ring to the Customer Service? I hear they are super helpful when it comes to troubleshooting =)

 

[look_at_her]

Don’t own a Majesty , but IMO this screw controls the tightness of tremolo arm movement ( inside the trem block ) - don’t know if I used the right words to describe , at least tried to help

 

[johnnyboogie]

Don’t own a Majesty , but IMO this screw controls the tightness of tremolo arm movement ( inside the trem block ) - don’t know if I used the right words to describe , at least tried to help

There is one screw controlling that but it's located elsewhere. You need to dive the bridge all the way in order to gain access to it, and it's quite smaller that this one =)

 

[PeteDuBaldo]

HI,
I have a Majesty 7. Does any one know what is the function of this screw hole? I am curious about it. Because I just use hex key to turn it, and a small screw fell out from this small screw hole. I am worried about this would influences the sound. I hope someone can help me. Thank you very much.

View attachment 33267

It controls the depth of the bar. It is used to set/adjust the height of the notch in the bar with the interference spring on the back of the trem block. If it is too loose the bar can be pushed in too deeply, and if it is too tight (too far in) then the bar won't snap into place.