• There is a glitch in the forum software and/or configuration that we are still trying to track down. For now, please make sure that the title of your new thread does NOT start with a number (digits). Otherwise, your post will appear to be saved but future attempts to read it will be met with an error message indicating the thread/post cannot be found. ~ admin

coldsummer

Well-known member
Joined
Aug 2, 2012
Messages
610
Location
Gloucestershire UK
I've always regretted selling my MM90 AL and they rarely if ever become available in the UK.

So I've been thinking........ would it be possible to convert an HH model to 3 P90's without too much hassle?

Advice would be appreciated.
 

DrKev

Moderator
Joined
Jul 8, 2006
Messages
6,234
Location
Somewhere between Paris and Buffalo
I'd suggest buying a new pickguard and the body would have to be routed but after that it's easy beans. The stock MM90 AL had 2 x 500kΩ pots, a 0.022µF tone cap and of course the silent circuit, which you'd be lucky to find used and can;t buy one new.
 

coldsummer

Well-known member
Joined
Aug 2, 2012
Messages
610
Location
Gloucestershire UK
I'd suggest buying a new pickguard and the body would have to be routed but after that it's easy beans. The stock MM90 AL had 2 x 500kΩ pots, a 0.022µF tone cap and of course the silent circuit, which you'd be lucky to find used and can;t buy one new.

Thanks Doc. It was the routing I was worried about.
 
Top Bottom