• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

s1monmb

New member
Joined
Jun 9, 2016
Messages
2
Hi everyone i already own several Musicman Guitars but the Majesty is my first one to have a piezo, now it's all fine and great except i can't seem to make it work, i've tried switching it between Stereo to Mono many times and it always seems to be stuck on stereo i am getting sound from the magnetic pickups and the 20db boost is working but nothing at all from the Piezo pickups. the guitar goes through the motions of switching but after it cuts and comes back and then flashes once which would suggest its switched to mono but the Piezo is still not making any sound, am i doing anything wrong is there anything else i need to set up i just dont get it? someone please help i'd be very grateful!!!!
 
Last edited:

JamieCrain

Well-known member
Joined
Mar 25, 2015
Messages
141
Hi, how do you know it's stuck in stereo? And are you using a stereo cable? If you are using a mono cable then you'll hear the mags all the time and the piezo may or may not be discernible depending on your rig set up. Ideally, You should run a stereo cable with the piezo line straight to PA or separate amp. Also try adjusting the mag/piezo mix pot on the back of the guitar with a small Phillips screwdriver. Cheers, Jamie
 
Top Bottom