Help! Ernie ball music man jpx-6 neck information please help!!!

[Navaho]

I have a ERNIE BALL MUSIC MAN JPX-6 and I need NECK INFORMATION PLEASE.

I keep a log of all my guitars and keep track on sizes that feel good to me. I need some infoemation on neck thickness at the first fret and thickness at the twelfth fret.

I am new to this forum and if I am not asking correctly or I am in the wrong area please let me know. I would think someone would know this info and it isn't a strange question considering other makers have this info posted on their sites. Thank you and I hope someone can help me out.

 

[Gio_Force_One]

Welcome to the forum.
is this what your looking for?

JPX 6: 1-11/16" (43.0 mm) at nut, 2-1/4" (57.2 mm) at last fret

 

[Navaho]

No...That is the width. I am looking for the thickness (from the bottom of the neck where it sits in your palm to the top of the fret board.

 

[Navaho]

So I can safely assume no one knows the answer to my question. People in here really know their guitars. I belong to a few different guitar forums and I get the answer in mt above question. Thank you to all.

 

[mikeller]

So I can safely assume no one knows the answer to my question. People in here really know their guitars. I belong to a few different guitar forums and I get the answer in mt above question. Thank you to all.

I recommend you contact customer support

 

[Navaho]

I still find it strange that in this whole forum NOBODY knows the answer to my question. The first time I spoke to EB MM asking info or a manual on this guitar they told me ask the FORUM.................Like I said I find it strange no one knows. It's not like a strange question. I have asked Ibanez, Jackson, Parker plus others the same question from the forum.....I was overwhelmed with response and information. I am very disappointed. I love the guitar but this forum is not very helpful and once again find it very hard no one has the answers.

 

[beej]

Look, most of the forum members are like yourself- we have guitars and we're usually busy playing them, not measuring.

If you really want the measurements you're probably best to go buy a cheap set of calipers and make the measurement yourself. Shouldn't be too hard. Telling us all how you're disappointed isn't going to get you very far.

 

[Navaho]

Why thank you beej, you have been very helpful. You will not get any feelings out of me............I understand if I don't get an answer means no one knows. I will relay that to service since they told me to seek help here.

 

[A.J.]

Navaho

These measurements will vary slightly from guitar to guitar as they are sanded by hand. I just measured one off the line and here's what I found:

Right at the first fret its .735"
Right at the twelfth fret its .835"

 

[Spudmurphy]

Hi Navaho.
I had a thread on the forum that shows the different neck profiles etc but the JPx isn't on it
http://www.ernieball.com/forums/mus...ckleheads-volunteer-neck-profile-project.html

If anybody out there sends me the details, I'll include it on the thread, in the meantime I'll copy/paste AJ's answer for future ref.

 

[Navaho]

Hello Spudmurphy
I am not really intrested in the profile but the height.

I got the info need from Billy and then from A.J. it is as follows:
Right at the first fret its .735"
Right at the twelfth fret its .835"

Thank You to all the helpful ones ;-)