• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

vashsiu

Member
Joined
Aug 1, 2008
Messages
6
I just bought a new john petrucci 2008 limited edition and when I tried to tune the string, I broke the string by playing with the lock behind the tuner, do I have to losen the lock and then tune or, I don't even have to touch the lock unless I have to change strings? Thanks
 

Twilight Zodiac

Well-known member
Joined
Jul 7, 2008
Messages
58
Hello there.
Locking tuners are great for people who hate tuning and winding strings. I love them on my guitars.
The thing with locking tuners are that you only unlock them when you have to change strings.
So here is a scenario.
Your strings are all worn and suck. So you grab your favorite EB strings. First you have to get the existing strings off. So you unlock them and remove the old strings, one at a time or all at once is up to you. Next you have to put the new strings on. And remember at this point the locking tuners are unlocked so you can put the new strings on. So you take the first string you want to put on. You string it through the body up the bridge and up to the tuner or however your guitar configuration is. You pull the string tight and then lock it. Then just tune up. Continue to do this until you're fully restrung.
After that you don't want to unlock them or else the tension of the lock will be released and the string will basically go limp. The lock is the replacement of the windings.
Sorry to answer a quick question with a long answer. Just easier for me to do it the long way.
 

vashsiu

Member
Joined
Aug 1, 2008
Messages
6
so basically i don't have to wind the string like i normally do to other guitars? how much string do i need to leave in order to do a normal tunning?
 

Slingy

Well-known member
Joined
Aug 15, 2007
Messages
1,526
Location
Fair Oaks, CA
Like TZ says, just pull it straight through as tight as you can with your hand and lock it down. It will wrap about half way when you tune it up. Cut it off as close to the peg as you want.

The idea is that when you use the tremelo there are less chances of binding around the peg when there is no wraps, so in theory should stay in tune better then a standard tuner.
 

vashsiu

Member
Joined
Aug 1, 2008
Messages
6
for some reason, i can't get the guitar in tune, is it because of the tuner locks or the tremolo bridge?
 

vashsiu

Member
Joined
Aug 1, 2008
Messages
6
just a quick question, is my bridge a floating tremolo bridge, if yes, can you guys tell me a proper way to set it up? i just cant get the guitar in tune
 

morsecode

Well-known member
Joined
May 21, 2007
Messages
453
Location
British Columbia, Canada
The bridge is floating and it is unlikely that you need to set it up. But in any event forum diagnostics will likely lead you into more trouble than anything.

Take into the retailer that you bought the guitar and have them help you out by showing you. You will see then how amazingly simple it is.
 

vashsiu

Member
Joined
Aug 1, 2008
Messages
6
I see, ok.. i will bring it back to HK tomlee music and see if they can fix this for me, i broke 2 strings already just by trying to set it up myself
 

raybies

Well-known member
Joined
Jul 28, 2008
Messages
117
Just do One string at a time, make sure your tuners are all with the holes straight with the neck, pull it as tight as possible, tighten lock, cut off, and tune.
 

petruccirocks02

Well-known member
Joined
Oct 22, 2006
Messages
1,923
Location
Levittown, PA
Don't forget that if your guitar came with 10's and you put 9's on it will mess up the level of the bridge and whatnot. You'll want to put the same guage on, unless you use 9's or something, then you'll probably have to do a setup in order to get the bridge leveled out and everything. I would take it to a pro if you're not comfortable doing it yourself.

-Phil
 

Dizzy

Well-known member
Joined
Aug 18, 2006
Messages
2,948
Location
Perth, Western Australia
Oh that poor guitar.

It's great that you've tried it yourself, but it's time to get someone to show you - as it's obvious you're VERY new to this.

You need to understand the mechanics of the tuners & trem.

Hope you get it sorted soon.
 
Top Bottom