Question Installing Crunchlab/Liquifire in my JP6

[TobiGuitar94]

Hey guy,
Im thinkin about installing CL/LF in my JP6 which has the stock pickups in it at the moment (Custom Wound, it is a 2001 model).
As the CL and Liquifire seem to be pretty familiar with the Custom wounds im asking if all i need to do to install them is to unsolder the current Pickups with all their coloured wires (5 as far as i know) from the pickup selector plate and just solder the new ones (which i assume have the same colours as the custom wound) to the pickup selector plate on the same positipon?
Or do i also have to resolder some of the wires going from poti to poti or from the pickup selector plate to the potis?
Is there anything else i have to do?

Thanks for help

 

[GHWelles]

The wiring should be identical. And when you are done you can send the originals to me...

 

[TobiGuitar94]

Thanks a lot, yeah those pickups are great anyway, maybe I'll like the CL/LF even lass then the custom wound but somehow, i hope that the LF is going to give me at least a bit more fatness on the high strings