jones4tone
Well-known member
I decided to draw the bridge on my LIII down onto the deck recently. But now I've changed my mind. Anybody know what the standard degree of float is on that model?
Is that at a particular fret? Or would it be constant the length of the string?
It's the open G-string; pulling the bar should raise the open G note up to a Bb(ish).
It's the open G-string; pulling the bar should raise the open G note up to a Bb(ish).
Yup.
[Fun Friday Whammy bar trivia on]
Interestingly enough, with Super Slinkys, when the G-string goes up a minor third, the B-string and D-string go up approx. a whole step, and the high-E string goes up about 1/2 step. This is why chords don't stay in tune under whammy bar use - each string changes a different amount (because different gauges and tensions). BUT with the trem set to float like we're talking about, if you play open position D major chord (ignore the A and low E strings) and pull up till the trem hits the deck, you get a C major chord (because D-A-D-F# goes up to E-C-E-G).
[whammy bar trivia off]
Yup.
[Fun Friday Whammy bar trivia on]
Interestingly enough, with Super Slinkys, when the G-string goes up a minor third, the B-string and D-string go up approx. a whole step, and the high-E string goes up about 1/2 step. This is why chords don't stay in tune under whammy bar use - each string changes a different amount (because different gauges and tensions). BUT with the trem set to float like we're talking about, if you play open position D major chord (ignore the A and low E strings) and pull up till the trem hits the deck, you get a C major chord (because D-A-D-F# goes up to E-C-E-G).
[whammy bar trivia off]