caballero59
Active member
- Joined
- Aug 24, 2016
- Messages
- 40
I've had my guitar about two weeks and the piezo on the 1'st string went dead. All others are fine. I removed the cover on the back but I cannot find any wiring harness entering the control cavity that has six wires (one for each saddle). There are two harness, each with a black, clear, and red but I think these are for the two MM90's. This suggest to me that the mixer that combines the 6 piezo signals into one is located under the bridge. I hope this is not true because it means I have to remove the bridge to replace one saddle. I was hoping someone could shed some light on this for me, thanks.
Scott
Scott
