• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

easelkillya

Well-known member
Joined
Dec 4, 2003
Messages
113
Location
Knoxville, TN
OK, I was just playing around with my Bongo, when I noticed my Piezo wasn't working properly. When I turn the Piezo all the way up, the G string is significantly quieter than the other strings. Is it the Piezo that's on the fritz, or can this problem easily be solved by something as simple as replacing the batteries? If it is the Piezo, will most Ernie Ball dealers be able to repair it easily? Thanks!
 

skabassist13

Well-known member
Joined
Mar 8, 2004
Messages
1,209
Location
Houston, Texas
I think, big word there, think, im not 100% sure, but i think its just a simple matter of adjusting the piezo output. each string has its own control for its volume, which is located under a rectangular control plate on the underside of the body. im pretty sure all you would have to do is open the cavity and turn the knob that is for the g string up until it is equal to the others. or if its as loud as it will go turn the others down so they are all eqaul in volume. now i dont own a bongo, or any piezo equipped instument, but i saw the control diagram for it on the eb website and it seemed pretty self explanitory. im pretty sure im right, might want to get jack or a mod in here to confirm me thoughts. hope this helps ya out.
Travis
 

jongitarz

Well-known member
Joined
Sep 15, 2003
Messages
6,049
Location
Here
skabassist is wise beyond his years..Take the small piezo cover off, and make sure all the small blue knobs are turned clockwise, and maxed out....If there still is a prob, call me 1 866 823-2255 ext237
Jon
 

easelkillya

Well-known member
Joined
Dec 4, 2003
Messages
113
Location
Knoxville, TN
There are 6 little knobs in there. What does what? Does the one on the end not turn all the way? It's only going about 90%. Other than that, they are turned all the way up, and the problem still persists. Any other comments? If not, I'll give Jon a call on Monday... thought I'd like to fix it before then! :rolleyes:
 
Last edited:

skabassist13

Well-known member
Joined
Mar 8, 2004
Messages
1,209
Location
Houston, Texas
thank you for the compliment jon. i try to be as knowledgeable as possible in any situation i can. and i like to help people out, and you cant relly do that unless you know what your talking about right?
Travis
 
Top Bottom