Question Regarding Adjusting Intonation on Cutlass

[vic_loher]

Went to adjust intonation on Cutlass and saw small holes in the piece on the tail of the trem. Not what it was expecting to see. Before I do something that might screw up the guitar, I wanted to ask about it. Does the piece on the trem stay in place and you adjust the intonation through the small holes or do I somehow remove the piece to get to the intonation screws?

Thanks for the help.

Vic

 

[Fro]

I adjusted mine through the holes. I'm not sure if the cover is removable.

 

[vic_loher]

Great! Thanks.

 

[mikeller]

Yeah - the cover is only removable from the underside of the bridge. Hex tool in the small holes to adjust intonation!!

 

[vic_loher]

Hi Mike,

Thanks for the info. Glad you told me a hex tool, otherwise I would have been trying a small phillips-head.

Vic

 

[DrKev]

Hex tool sizes are listed here...

http://forums.ernieball.com/ernie-b...-volume-pedal-info-post920311.html#post920311

 

[vic_loher]

Just what I needed. Thanks Dr. Kev.