Question New EBMM guitar

[Kehemot]

Hello guys,

I got a question for everyone here. I have decided to buy a Music Man guitar. I would like to ask for some recommendations/tips/buying guide, since I do not have fond experience playing these guitars (I had an opportunity to play JP6 for some time and held Luke II once - imo JP6 was awesome). I have been browsing Reverb and partly eBay and found some really interesting pieces (mostly JP, Luke, Sabre and one Jason Richardson model). From the reviews etc. I know that any guitar is going to be great, I just want to gather some more info and to confirm my decision.

I am looking for a model that has got non-glossed neck (just gunstock oil and rubbed oil "finish"), thin neck (since I don't have long fingers) and which could be used for any genre. I mostly play rock, hard rock, metal, prog and sometimes instrumental rock.
Thank you very much for all responses.

 

[jayjayjay]

The ones you're looking at would all probably fit the bill. I personally have a Sabre, and it has a thin neck w/ the oil and wax finish. I understand that the width of the Sabre is a little on the wider side, though. The only other EBMM I have for comparison is the Axis, which has a slightly narrower neck but a thicker asymmetric carve - it feels great as well, but noticeably different than the Sabre.

Best bet, if you can, is to go to a store that has the various models and try them. Otherwise, if you liked the JP6, maybe that's your answer.

 

[Kehemot]

The ones you're looking at would all probably fit the bill. I personally have a Sabre, and it has a thin neck w/ the oil and wax finish. I understand that the width of the Sabre is a little on the wider side, though. The only other EBMM I have for comparison is the Axis, which has a slightly narrower neck but a thicker asymmetric carve - it feels great as well, but noticeably different than the Sabre.

Best bet, if you can, is to go to a store that has the various models and try them. Otherwise, if you liked the JP6, maybe that's your answer.

Thank you for your response. The problem is that there are no guitar shops that would offer EBMM guitars for trying out. I know that there is a little chance I won't like the guitar without trying it out.

 

[racerx]

Thank you for your response. The problem is that there are no guitar shops that would offer EBMM guitars for trying out. I know that there is a little chance I won't like the guitar without trying it out.

If possible try to find an online retailer that has a forgiving return policy (or take a day trip to a place that may have them). I doubt you'd outright hate any, but your preferences are your own. Its important to find what you like.

Of the four you listed - the Luke will have a smaller nut-width (41mm - think '60s-ish Strats). The other three will have a more modern nut-width (43mm - common width). Also, of those four, I believe the Luke will be the fullest neck profile of the bunch.

All of the guitars will do well in the genres you listed in my opinion. If you lean more towards metal, then I suspect the JP/JRs will be most appropriately voiced.

 

[WaringsChoville]

Hi there! The Music Man brand is one of the more popular guitar brands, especially among rock and metal players. As for recommendations, I would say that if you're looking for a guitar that can be used for any genre, then definitely go for one of the JP models. The JP6 is a great all-around guitar that can be used for anything. If you're looking for something specifically for rock and metal, I recommend the Luke or the Sabre. Both of those models are great for heavier styles of music. You can also find accessories for a guitar here. Read reviews, watch videos, and, if possible, try to play the guitar yourself before buying it. That way, you'll know for sure if it's the right guitar for you. I hope this helps!

 

[jfb44]

Thank you for your response. The problem is that there are no guitar shops that would offer EBMM guitars for trying out. I know that there is a little chance I won't like the guitar without trying it out.

I didn't play an EBMM until I got an Axis in the summer of 2017. I currently own 10 Axes & have 2 on their way in the next 30 days.

I've never played a Sterling, but why not buy a used Sterling variant of the EBMM guitar you're interested in first. That way you don't commit as many $s if it's not to your liking.

Or If you can commute to the nearest vicinity Guitar Center, you can request to have an EBMM shipped to that GC, from another GC location, for you to try out. You just pay shipment cost which is like $20-$30.

 

[jayjayjay]

I didn't play an EBMM until I got an Axis in the summer of 2017. I currently own 10 Axes & have 2 on their way in the next 30 days.

I've never played a Sterling, but why not buy a used Sterling variant of the EBMM guitar you're interested in first. That way you don't commit as many $s if it's not to your liking.

Or If you can commute to the nearest vicinity Guitar Center, you can request to have an EBMM shipped to that GC, from another GC location, for you to try out. You just pay shipment cost which is like $20-$30.

I have both EBMM and Sterling Axes. The Sterling is close, but it's not identical. For one, the Sterling Axis has a 12" radius fretboard, while the EBMM has a 10". The EBMM is more comfortable. The back carve, though, is pretty similar.

Also, the OP is in the Czech Republic. I don't think GC is overseas.