• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

bass man

Member
Joined
Dec 5, 2006
Messages
10
Hi guys i was thinking of buying a Single humbucker Stingray 5 with a and Restringing it so it had high C String. i think this would suit me more than a low B because the type of music i play. i was just wondering if there is any complications in doing this.

thanks.
 

phatduckk

Well-known member
Joined
Jul 25, 2004
Messages
8,145
Location
San Mateo, California, United States
im not a setup pro but id say youd at least need to redo the action and set it up again.

its possible that the nut for the B string may be a bit wide for an E so maybe you'd have to get someone to take care of that.

again im no expert but i think (in my not so professional opinion) that it shouldnt be a big deal. call up customer support and see what the real pros have to say

good luck
 

cybersnyder

Well-known member
Joined
Jan 6, 2006
Messages
110
Location
MD
I have an SR5 setup like that now. I just used the standard nut. No problems with setup or the nut. Don't use the D'addario 6 string that's usually stocked at Guitar Center. It sounds like crap. Too much zing on the C and not enough "booty" from the lower strings. My SR5 will be going back to BEADG with Slinkys as soon as I get around to it.
 

adouglas

Well-known member
Joined
Aug 12, 2005
Messages
5,592
Location
On the tail end of the bell curve in Connecticut
Why not try the Slinky 6 string set before you give up?

I think I read somewhere that Tony Levin has (or had) his fretless SR5 strung high-C. Makes a lot of sense to me for fretless...not so much for fretted.

If (when) I get a fretless I'm going to try it, just to see.
 

cybersnyder

Well-known member
Joined
Jan 6, 2006
Messages
110
Location
MD
Why not try the Slinky 6 string set before you give up?

I just have no need for the high C. It was an experiment to see if I'd find it worthwhile and I didn't. Even without the "zing" I'd rather have the low B. But is kinda fun to play with lots o' distortion on the upper strings.
 

bassmonkeee

Well-known member
Joined
Apr 25, 2004
Messages
4,628
Location
Decatur, GA
I've strung both of my 5 string Bongos (fretted and fretted) at various times with a high C and it was never a problem--even with the compensated nuts.

One advantage of a high C on a fretted bass is that chords sound great, if you are into that kind of thing. And, the high C on the fretless has a great singing quality.

I had planned on buying an additional Bongo 5 to leave set up with a high C, but now that there is going to be a six string Bongo, I'll probably just get one of those, instead in the first year of their release, or so....

Over the years, I've set up many 5 string basses with a high C and never had any problem with the nut slots being too big for the shift in string gauges. And, every bass has always intonated properly with my Petersen strobe tuner. A little tweak in the neck to account for the increase in tension (the high C has more tension than a low B and will increase the pull on the neck), and you are good to go.
 

bass man

Member
Joined
Dec 5, 2006
Messages
10
im new to this forum and its great thanks for all the help and i hope to talk again soon
 
Top Bottom