• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

guitarman23

Well-known member
Joined
Aug 22, 2007
Messages
652
omg i am so happy! my smy2d arrived and im going crazy, but there is one thing:eek:
im not sure how to tune this the guitar, witch i need to know:) any info? or ill just serf the web:)

DSCN0596.jpg
 
Last edited:

puppyonacid

Well-known member
Joined
Feb 3, 2006
Messages
491
Location
Manchester UK
im not sure how to tune this the guitar, witch i need to know:) any info? or ill just serf the web:)

Thats pretty :D

unlock the locking nuts at the nut. Youll need an allen key which should have come with it. Tune it up with a tuner. Lock the lockings nuts (but dont over tighten them!). Then, using the fine tuners (thumbscrews at the bridge) fine tune it and you're good to go!

Hope that helps!
 

roburado

Well-known member
Joined
Jul 18, 2005
Messages
6,089
Location
Commerce, MI
I would also do this. I would turn the fine tuners so that they're at the midpoint of their range of travel (i.e., roughly halfway between screwed in all the way and screwed out all the way). Then, I would go ahead and unlock the nut and turn the big tuners until things are in tune. Then, I'd lock the nut. After that, I would re-check the tuning and use the fine tuners for any small adjustments that need to be made.
 

guitarman23

Well-known member
Joined
Aug 22, 2007
Messages
652
yea im all good with the tunings, thank you all :) this guitar is A Killer!!!!
sounds freaken awesome!
 

jazzbo jim

Well-known member
Joined
Feb 4, 2005
Messages
634
Location
Great White North
Hmmm...I thought those guitars were factory tuned and crazy glued to Morse's specs?
I'd call customer service if you've experienced "pitch drift"
good luck
 

Warg Master

Well-known member
Joined
Apr 7, 2004
Messages
2,392
Location
SLC
here's the best tip of all... My address is.....: :D






... That's right!! Send it to me, I'll take real good care of it!!
 
Top Bottom