screen of unsymmetrical evh neck shape

[gitarrerudi]

hi!
i´d like to reduce my guitars´ neck profile to the unsymmetrical evh neck shape...does anybody know if there are screens or measurement-details available somewhere? hints about infos...?
thanks a lot, rudi

 

[Tone?]

he, you and the rest of the world would like this........


even if you were to get the basic specs, if i remember correctly the neck shape was digitized off Ed's old 5150, so it still wont be the same feel.


So you would probably have to take a EVH or Axis neck and have someone digitize that to get it right. Assuming you also use the same technique to build the neck as EBMM does.

Has to be one of the most mojo having necks ever. Peaveys doesnt even come close in my opinion.

 

[Jack FFR1846]

Peaveys doesnt even come close in my opinion.

I thought they had the same profile.

I do know the radius on my Wolfgang is larger than that of my ASS. The frets are a larger, higher type (don't know the word to describe that) on my Wolfgang, but I believe it may have been refretted before I bought it.

The ASS neck is definately faster due to the fret size difference.

jack

 

[spkirby]

This is a bit like going to Coca Cola and asking for their secret recipe! The only way you are going to get anywhere near to what you want is to buy an Axis or EVH....!

 

[Shadowbox]

Personally, I'd save my cheddar for an Axis or an Axis Super Sport. The balance and playability are amazing.

You could always try your luck with sandpaper, but I wouldn't. If something goes wrong, there ain't no fixing it!

 

[whitestrat]

Just buy an Axis...

 

[Spudmurphy]

it looks like this ...

 

[Tone?]

did you cut those out with your teeth??



now everything is clear

 

[Ahess86]

The only way to really do it is to get an axis neck and take it to someone with a scanner/cnc router. This will cost way too much (think thousands) so I'd just go for an axis

 

[Spudmurphy]

did you cut those out with your teeth??



now everything is clear

Don't be so stupid!!!!

I sawed through the neck at the nut, 5th and 12th and drew the outline.
How else can ya do it ??

 

[Tone?]

Don't be so stupid!!!!

I sawed through the neck at the nut, 5th and 12th and drew the outline.
How else can ya do it ??

thats the way to go! lol