Powman
Well-known member
I was thinking of getting a Basskicker platform but it was over $700 for the complete kit. So I made my own and its working well. Here's the parts list
1. Aura Bass Shaker (Parts Express)
2. 70 W Subwoofer amp (Parts Express)
3. Platform made from 2 sheets of 2 feet by 2 feet half in plywood. Basically, I made a hollow cavity with 1 inch by 2 inch pine as a frame in between the plywood. The hollow cavity works better IMO.
4. Bass shaker screwed into the platform.
5. Shure SM 58 mic for the kickdrum.
6. Then to ART mic pre-amp
7. Then to the Subwoofer amp
8. Then speaker wire to the bass shaker.
Works quite well and allowing me to easily feel the kick drum. Makes me a better bass player...I am much tigher with the drummer.
I have also used this on my iMac. I used some RCA splitters so that a signal gets sent to both the normal subwoofer and my bass shaker subwoofer. So when jamming to a song, again I also feel the drums (but also the recorded bass).
Lastly, it can be also used to just feel my own bass if I wanted to do that.
I paid about $200 for parts. You folks in the US of A are in better luck because I paid too much for shipping and brokerage fees. You won't have to pay for shipping like I did.
Give it a try...
1. Aura Bass Shaker (Parts Express)
2. 70 W Subwoofer amp (Parts Express)
3. Platform made from 2 sheets of 2 feet by 2 feet half in plywood. Basically, I made a hollow cavity with 1 inch by 2 inch pine as a frame in between the plywood. The hollow cavity works better IMO.
4. Bass shaker screwed into the platform.
5. Shure SM 58 mic for the kickdrum.
6. Then to ART mic pre-amp
7. Then to the Subwoofer amp
8. Then speaker wire to the bass shaker.
Works quite well and allowing me to easily feel the kick drum. Makes me a better bass player...I am much tigher with the drummer.
I have also used this on my iMac. I used some RCA splitters so that a signal gets sent to both the normal subwoofer and my bass shaker subwoofer. So when jamming to a song, again I also feel the drums (but also the recorded bass).
Lastly, it can be also used to just feel my own bass if I wanted to do that.
I paid about $200 for parts. You folks in the US of A are in better luck because I paid too much for shipping and brokerage fees. You won't have to pay for shipping like I did.
Give it a try...