• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

lenny

Well-known member
Joined
Feb 4, 2006
Messages
2,415
Location
Nova Scotia Canada
Thanx in Advance gang

1.What gauge strings came on it

2.What is the difference/explanation between the Pickup in Series and parallel besides the sound obviously :D
 

Beth

Well-known member
Joined
Aug 16, 2002
Messages
2,910
Location
Indio
From the FAQ:

"Q: What does the 3 way switch do on the Stingray 5 and the Sterling?

A: With the switch in the 'closest to neck' position, the pickup's flow of voltage follows a snake like pattern around the poles, this is called the Series position, creating an out of phase slightly brighter humbucker tone. The second position is the Single Coil position, only the coil closest to the bridge is used creating a thin, bright sound for soloing, a phantom coil is added to reduce single coil noise. The last position is the Parallel position, use this for the traditional thick bottom end bass sound made famous by the Stingray 4. "
 

lenny

Well-known member
Joined
Feb 4, 2006
Messages
2,415
Location
Nova Scotia Canada
Ahhh thanx beth so pickups are pickups bass or guitar ,never had a ton of experience with active electronics so just wanted to make sure my head was around it proper ,thanx again!
 
Last edited:

bovinehost

Administrator
Joined
Jan 16, 2003
Messages
18,200
Location
Dall-Ass, TX
Also, I will tell you a little secret that most people don't know.

If you move that little switch back and forth, the sound changes.
 
Top Bottom