dfrady
Well-known member
Can anyone tell me the factory specs for neck relief. I looked in the F.A.Q. but it only gave it for the basses.
- Thread starter dfrady
- Start date
roburado
Well-known member
Is this the type of thing you want?
Q: How do I setup my Music Man Axis SuperSport?
A: First, check relief in the neck by holding the lowest (bass) string down on the second fret with your fretting hand, then hold it down on the 12th fret with your right thumb and tap on the string in the middle to show how straight the string is. It should be no more than the thickness of a thick business card. If there is no relief in the neck, applying a little pressure in the middle of the neck (downward) after adjusting the trussrod wheel should take care of it. If not, please contact us as it may be necessary to send the instrument in to the factory.
Factory string setting for standard tuning starts at the bass side 2/32" (0.0254m) to 5/64" (0.127m) and the treble side is 3/64" (0.0762m) to 2/32" (.0254m) measured from the 12th fret to the bottom of the strings. The top of the strings should have the radius of the fretboard when you are looking at the strings in the playing position and by rotating the instrument while at the same time bringing strings into view one at a time. Remember, string height is ultimately determined by your preference and playing style.
Now, you are ready to play your guitar. If a string buzzes on an open string to the 5th fret and no higher, more relief is needed. If there is more buzz from the 5th to the 12th fret, the neck needs to be straighter. You should check the string height after every adjustment. If the buzzing happens throughout the neck, the string height needs to be increased.
Experiment a little to get the exact action you want.
Q: How do I set up my '99 Luke with the floating tremolo?
A: First, check relief in the neck by holding the lowest (bass) string down on the second fret with your fretting hand, then hold it down on the 12th fret with your right thumb and tap on the string in the middle to show how straight the string is. It should be no more than the thickness of a thick business card. If there is no relief in the neck, apply a little pressure in the middle of the neck (downward) after adjusting the trussrod wheel,it should take care of it. If not, please contact us.
Factory string setting for standard tuning starts at the bass side 2/32" (0.0254m) to 5/64" (0.127m) and the treble side is 3/64" (0.0762m) to 2/32" (.0254m) measured from the 12th fret to the bottom of the strings. The top of the strings should have the radius of the fretboard when you are looking at the strings in the playing position and by rotating the instrument while at the same time bringing strings into view one at a time. String height is determined by your preference and playing style.
If a string buzzes on the open note to the 5th fret and no higher, more relief is needed in the neck. If there is more buzz from the 5th fret to the 12th fret, the neck needs to be straighter (less relief). Check the string height at every adjustment. If buzzing is present throughout the neck, the string height needs to increase. After every adjustment it is necessary to re-tune the guitar.
The standard float height is measured at 1 1/2 steps on the G-string. If you set this first at 440 tuning, it may make it easier to keep the bridge close to the same angle while making all of the other adjustments. You may want a different amount of float - many players prefer 1/2 or only 1 step of float.
After each adjustment, return to step one, and start again.
Q: How do I setup my Music Man Axis SuperSport?
A: First, check relief in the neck by holding the lowest (bass) string down on the second fret with your fretting hand, then hold it down on the 12th fret with your right thumb and tap on the string in the middle to show how straight the string is. It should be no more than the thickness of a thick business card. If there is no relief in the neck, applying a little pressure in the middle of the neck (downward) after adjusting the trussrod wheel should take care of it. If not, please contact us as it may be necessary to send the instrument in to the factory.
Factory string setting for standard tuning starts at the bass side 2/32" (0.0254m) to 5/64" (0.127m) and the treble side is 3/64" (0.0762m) to 2/32" (.0254m) measured from the 12th fret to the bottom of the strings. The top of the strings should have the radius of the fretboard when you are looking at the strings in the playing position and by rotating the instrument while at the same time bringing strings into view one at a time. Remember, string height is ultimately determined by your preference and playing style.
Now, you are ready to play your guitar. If a string buzzes on an open string to the 5th fret and no higher, more relief is needed. If there is more buzz from the 5th to the 12th fret, the neck needs to be straighter. You should check the string height after every adjustment. If the buzzing happens throughout the neck, the string height needs to be increased.
Experiment a little to get the exact action you want.
Q: How do I set up my '99 Luke with the floating tremolo?
A: First, check relief in the neck by holding the lowest (bass) string down on the second fret with your fretting hand, then hold it down on the 12th fret with your right thumb and tap on the string in the middle to show how straight the string is. It should be no more than the thickness of a thick business card. If there is no relief in the neck, apply a little pressure in the middle of the neck (downward) after adjusting the trussrod wheel,it should take care of it. If not, please contact us.
Factory string setting for standard tuning starts at the bass side 2/32" (0.0254m) to 5/64" (0.127m) and the treble side is 3/64" (0.0762m) to 2/32" (.0254m) measured from the 12th fret to the bottom of the strings. The top of the strings should have the radius of the fretboard when you are looking at the strings in the playing position and by rotating the instrument while at the same time bringing strings into view one at a time. String height is determined by your preference and playing style.
If a string buzzes on the open note to the 5th fret and no higher, more relief is needed in the neck. If there is more buzz from the 5th fret to the 12th fret, the neck needs to be straighter (less relief). Check the string height at every adjustment. If buzzing is present throughout the neck, the string height needs to increase. After every adjustment it is necessary to re-tune the guitar.
The standard float height is measured at 1 1/2 steps on the G-string. If you set this first at 440 tuning, it may make it easier to keep the bridge close to the same angle while making all of the other adjustments. You may want a different amount of float - many players prefer 1/2 or only 1 step of float.
After each adjustment, return to step one, and start again.
dfrady
Well-known member
No thicker than a business card, so i'm guess that 12thousanths of relief is factory specs.
