sambarugh
Well-known member
Hey Everyone,
I've posted this in a few forums with no useful feedback, so I turn to you for some much needed help.
Recently I've started to use my amp to record rather than just play live, and I've noticed a strange occurrence when palm muting distorted notes/chords. I seem to be getting a residual hiss of some kind which is extremely frustrating.
I have been troubleshooting the problem but finally run out of ideas. The amp performs perfectly well other than this, so I'd rather not have to replace it. Here is my process so far
1. Seeing as I hadn't replaced the tubes in about 12 months, I started here first. It didn't help.
2. I contacted Line 6 directly with the issue and provided a sound file so they could hear the problem. Their suggestion was to purchase a noise gate of some kind.
3. So, I did. I picked up a BOSS NS-2 and turned it up all the way. It took away a lot of unwanted noise but didn't fix the root of the problem.
4. A friend suggested I turn down the reverb - I dialed it back with no luck.
So here it is - an outline my exact settings and a link to the sound clip. Any thoughts or suggestions would be greatly appreciated.
Download Feedback.mp3
Guitar
JP7 (see it is somewhat relevant to the board
)
Amplifier
Line 6 / Bogner Spider Valve 112.
Reverb set to 9 o'clock
Ground Lift - Lift
NS-2
Threshold - Max
Decay - Min
I've posted this in a few forums with no useful feedback, so I turn to you for some much needed help.
Recently I've started to use my amp to record rather than just play live, and I've noticed a strange occurrence when palm muting distorted notes/chords. I seem to be getting a residual hiss of some kind which is extremely frustrating.
I have been troubleshooting the problem but finally run out of ideas. The amp performs perfectly well other than this, so I'd rather not have to replace it. Here is my process so far
1. Seeing as I hadn't replaced the tubes in about 12 months, I started here first. It didn't help.
2. I contacted Line 6 directly with the issue and provided a sound file so they could hear the problem. Their suggestion was to purchase a noise gate of some kind.
3. So, I did. I picked up a BOSS NS-2 and turned it up all the way. It took away a lot of unwanted noise but didn't fix the root of the problem.
4. A friend suggested I turn down the reverb - I dialed it back with no luck.
So here it is - an outline my exact settings and a link to the sound clip. Any thoughts or suggestions would be greatly appreciated.
Download Feedback.mp3
Guitar
JP7 (see it is somewhat relevant to the board
Amplifier
Line 6 / Bogner Spider Valve 112.
Reverb set to 9 o'clock
Ground Lift - Lift
NS-2
Threshold - Max
Decay - Min