• Ernie Ball
  • MusicMan
  • Sterling by MusicMan
Ernie Ball Music Man Custom Design Experience

Changing tremolo claw with brass one on JP7

DrKev

DrKev

Moderator
Joined
Jul 8, 2006
Messages
7,450
Location
Somewhere between Paris, Dublin, and Buffalo
I look at it this way...

The brass claw and screws will look nice with your existing brass block.

A LOT of people are skeptical that this kind of thing makes any difference. I'm definitely one of them. :D

If you do decide to do this, please do 'before' and 'after' recordings so any tonal difference can be objectively verified. It would be very cool and useful to do!

Just be sure that the new screws are of the *exact same size and thread pitch* as the original screws. (Don't use screws that don't match because you will damage the threads in the holes in the body and with the amount of force these screws are bearing I don't think that is a good idea).
 
Dado Simic

Dado Simic

Active member
Joined
Jan 22, 2015
Messages
43
Location
Zvornik, Bosnia and Herzegovina
DrKev said:
I look at it this way...

The brass claw and screws will look nice with your existing brass block.

A LOT of people are skeptical that this kind of thing makes any difference. I'm definitely one of them. :D

If you do decide to do this, please do 'before' and 'after' recordings so any tonal difference can be objectively verified. It would be very cool and useful to do!

Just be sure that the new screws are of the *exact same size and thread pitch* as the original screws. (Don't use screws that don't match because you will damage the threads in the holes in the body and with the amount of force these screws are bearing I don't think that is a good idea).
Click to expand...

I would surely made a test.

But my JP7 is heavily modded.I use custom pickups made by my specifications,volume/tone push pull (single coil),additional 3-way terminal switch for series/parallel/series out of phase combinations,Russian PIO cap .0.22uF.
I also done shielding and ESP tremolo stabilizator(which improved sustain and tuning stability).

If there is difference It should be hearable.But I`m pretty much sure it would be,not too much as block,but surely it would add something to tone and sustain.

Does anyone know the actual size of original screws on JP7?

And here are some pictures of guitar in anyone finds it interesting to see:
https://www.dropbox.com/s/30498an5fcc9g4m/SAM_2927.JPG?dl=0
https://www.dropbox.com/s/yu9t4ega0np89v5/SAM_2935.JPG?dl=0
https://www.dropbox.com/s/gyta0z8f7lv8o8i/SAM_2939.JPG?dl=0
https://www.dropbox.com/s/fezro7uopqmkfud/SAM_2950.JPG?dl=0
https://www.dropbox.com/s/e662d6x5p2ghkkz/SAM_2954.JPG?dl=0
https://www.dropbox.com/s/kpfrozhtynrrhm2/SAM_2923.JPG?dl=0
 
Last edited:
Dado Simic

Dado Simic

Active member
Joined
Jan 22, 2015
Messages
43
Location
Zvornik, Bosnia and Herzegovina
SPI said:
fokin pickups)))) russian invasion! What are specifications of these pickups, BTW?
Click to expand...

Yeah they are custom made by Ilya.He is a great guy and very patient too.He listen your every wish.
Pickups are based on Bare Knuckle Nailbomb bridge and neck kind a hybrid between Coldsweat and Emerald.
But of course there are slight modifications from original recipes.

Bridge has unoriented magnets which really gives them more dynamic tone.It feels great and react very well.
And also it has flat poles on frist 3 strings to prevent it from being ice picky for this kid a pickup.

Neck has that high end bite of Cold sweat,its Alnico 5 demagnetised to Alnico 4 level,so it possess that sweet mids of Emerald.
All in one package.

I can`t be more happy really.
 
Spudmurphy

Spudmurphy

Well-known member
Joined
Aug 23, 2005
Messages
12,037
Location
Cardiff, United Kingdom
well done sir - good luck on fitting it - don't let the screwdriver slip as you will scratch the back of your guitar!! As my Dad used to say "put some protection on, and it won't prove to be a costly mistake" ! :)
 
You must log in or register to reply here.
New Slinky Gauges
Top Bottom