Hello, I have a 2016 Cutlass configured as SSS which I dearly love but hankering for a HSS configuration. I have a spare Seymour Duncan JB pick-up and I'm wondering whether it's an easy job OR NOT (routing.. active circuitry..) to convert my Cutlass and then also if it didn't work out to reverse the conversion back to its former state.. has anybody done this before and with what success?
-
Security notice: Ernie Ball staff will never send you a direct message about a prize or giveaway, and will never ask you to click a link to "claim" anything.
If you receive a message like that - even from an account whose name looks official - do not click the link. Please report it using the Report link on the message so the moderators can act. A scam campaign impersonating admin accounts was blocked on 29 July 2026; those accounts are banned and their messages have been deleted.
Convert SSS Cutlass to HSS, doable or AVOID?
- Thread starter Chalkdust
- Start date
Jim Jim Jeree
Member
Depends on the pcb. Take a look and see if it has open spots on it. That would be the easiest scenario.
beej
Moderator
The actual wiring isn't complicated, but I don't think that year Cutlass is routed for a humbucker in the bridge, so unfortunately that would mean surgery to make it fit. Beyond that (and the pickguard), the board is going to have 250k pots, so you'd want to pick a humbucker that works with that.
Easier would be finding a single-coil sized humbucker that works well with 250k pots. I've had good experiences with the Dimarzio Chopper ... obviously there are a ton of options out there.
Easier would be finding a single-coil sized humbucker that works well with 250k pots. I've had good experiences with the Dimarzio Chopper ... obviously there are a ton of options out there.
