• Ernie Ball
  • MusicMan
  • Sterling by MusicMan

Lance Romance

Well-known member
Joined
Sep 24, 2005
Messages
130
Location
London, Ontario, Planet Earth
Axis Supersport with alder body, BFR toneblock, killer quilttop, solid rosewood neck, 3 X MM90s, vintage trem. All the patterns are there already (exception toneblock). Should be easy, know I'll wait forever.-Eric
 

Mayo 84

Well-known member
Joined
Jan 23, 2007
Messages
83
Location
Novara, Italy
Custom make??

Axis shape and woods,
David Gilmour or Luke EMG set or Tone Zone + 2 texsas special or 2 mm p90!, (but no pickguard)
MM Vintage tremolo,
Axis Neck (maple and no matching headstock),
One volume, 5 way switch and....
 
Last edited:

koogie2k

Well-known member
Joined
Dec 28, 2002
Messages
5,859
Location
Moyock, NC
Mine would be:

Axis hardtail
Koa Top
Rosewood neck
2 M90's (cream colored)

Other than that...whatever the factory puts out....they are all customs to me. :cool:
 

roburado

Well-known member
Joined
Jul 18, 2005
Messages
6,089
Location
Commerce, MI
I think mine would be a cross between a BFR JP and a Silo Spec. Probably HSS configuration. Maybe, it could be like Morse's HSSH or something. I don't know if that's even possible. Switch for piezo like on the JPs. Probably hardtail. Maybe trem.
 

Big Mike

Well-known member
Joined
Aug 31, 2005
Messages
290
Location
Northern California
Probably a maple board, pearl white Silo with bigger neck but same basic shape.
Wagner pickups.

Just slightly adjust perfection for my taste. LOL
 

petruccirocks02

Well-known member
Joined
Oct 22, 2006
Messages
1,923
Location
Levittown, PA
A JP6 BFR fully loaded except the finish would be Mystic Dream, and the fretboard would have LED's in the inlays. And I'd love to have the same guitar, but with a birds eye fretboard.

-Phil
 

rickjohns

Well-known member
Joined
Aug 31, 2007
Messages
123
I'll take an axis, painted a deep, rich blue, and I want the edge where my right arm comes in contact with the body softened like a strat. That is all I would change, and I'll add a dtuna. It would be the EBMM RJ series. It feels good to dream, doesn't it?:D
 

Skoorbdooh

Active member
Joined
Sep 2, 2007
Messages
30
It would be a Tele - Axis of course. One piece lightwieght ash body, Mpl/Mpl neck and a tele style bridge with Kinman tele pickups and piezo saddles. Wait a minute !! I built that guitar (from scratch) 4 years ago and it lives in a blonde MM Axis case. Now I gotta come up with another. 12/6 double neck Axis ?? How bout just a 12 string Axis with lipsticks ? ? ? :D:D:D
 

freewheel

Member
Joined
May 21, 2007
Messages
11
Morse Koa body, natural finish

Morse Y2D profile Koa neck, Pao Ferro board, .106" X .036" fret wire, Gold leaf EBMM logo

JP tremolo, locking Schaller tuners

SD JB bridge SD Jazz neck with black bobbins

250k ohm volume and tone - .03 uf tone capacitor

1 volume, 1 tone, 3-way toggle switch, mini "kill" switch

Shell guard

and blasphemy....a 25" scale length!
 
Last edited:

Bazaboy

Well-known member
Joined
Aug 2, 2006
Messages
57
Another dream...Trans Orange ASS with Dynasonics or Filtertrons & a Bigsby Trem w/Maple neck & Rosewood board. Drool...
 

ba2m

Well-known member
Joined
Jun 4, 2006
Messages
413
Location
jakarta, indonesia
silhouette special with luke's neck shape, or
silhouette with luke's neck shape, or
albert lee with luke's neck shape, or
steve morse sig with luke's neck shape, or
benji sig with luke's neck shape, or
SUB with luke's neck shape, or
whatever with luke's neck shape

:D:D:D i am falling in love!!!..
 

alf cockle

Well-known member
Joined
Feb 12, 2007
Messages
394
Location
montreal,canada,ormond beach,fla
body..silsp...alder..neck..silsp..occasional birdseye..rosewood board...pickups...mm90..mm90..hb..colour..pearl blue/turtle pickguard/black pups..trem....graphtech compensated nut and bridge saddles
 

whitestrat

Well-known member
Joined
Aug 13, 2007
Messages
2,589
Location
The Little Red Dot
Mine would be this:

  • Silhouette base shape (Not the Silo Special shape)
  • 2 piece light weight Alder Body (3lbs if possible)
  • Bolt-On construction (No point in neck pocket)
  • John Petrucci forearm cutaway
  • SSS configuration
  • Sustainiac Neck Pickup/Driver Single Coil size White
  • Kinman AVn56 Middle Pickup White
  • Kinman AVn69b Bridge Pickup White
  • Jumbo frets
  • Piezo equipped standard bridge
  • 1 Piece Quarter-Sawn heavily flamed maple neck, JP6 Neck Profile/Shape
  • No inlays except for 12th fret (2 Abalone dots by the side), but with side-neck markers
  • Unpainted Headstock
  • Bone nut
  • Locking Tuners
  • Gold hardware
  • White Pickguard
  • White knobs
  • Master Magnetic Volume
  • Master Magnetic Tone
  • Piezo Volume
  • 5 Way Selector Switch
  • Thin coated Metallic Black Sparkle finish (EBMM's metallic paints are the best in the industry!!!)

*sigh*... I wish EBMM would be willing to build this for me... :( I'd pay for it too!!!:D
 
Top Bottom